JimInOz
Senior Member
Hi All,
It's about time I applied myself to fixing the bad R/H Final Drive on my Komatsu D31S-16.
I have the parts & repair manuals,so I'm OK there.
However,I'm interested in hearing any tips & hints that might make this repair a "did it right first time" repair.I had to import replacement parts from the UK ,so I need a good result,first time.
I've fixed a few steering clutches & the odd TD9 gearbox,but never done anything except oil change on a Final Drive.
Bearings are NTN brand....are there any brands which are better/best for this application?
All advice is appreciated.Thanx..
Jim
It's about time I applied myself to fixing the bad R/H Final Drive on my Komatsu D31S-16.
I have the parts & repair manuals,so I'm OK there.
However,I'm interested in hearing any tips & hints that might make this repair a "did it right first time" repair.I had to import replacement parts from the UK ,so I need a good result,first time.
I've fixed a few steering clutches & the odd TD9 gearbox,but never done anything except oil change on a Final Drive.
Bearings are NTN brand....are there any brands which are better/best for this application?
All advice is appreciated.Thanx..
Jim
Attachments
Last edited: