• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Help kubota svl95 fuel temperature sensor P3019

O

Onfirediesel

New Member
Joined
May 16, 2026
Messages
2
Location
Waco TX
Mzook said:
Did you figure this out
I wish I would have seen it when you posted I ran across this problem twice now, what I do is take and put a 1k ohm resister in between pin A-74 and A-95 that will give you a fuel temp reading that will allow you to calibrate pump with the Texa Scan tool
The first time I wanted to calibrate a SVL95-2 I just couldnt so I thought might be that my texa unit cant do it till I started digging around and seen that they dont have a fuel temp sensor in the 95 so I thought to myself ok a sensor is just a resistor why not see if I can find the correct pins so I search around till I found the correct pinout for that ecu with temp sensor

Hope this helps in the future
Click to expand...
Currently having the same problem. Do you have any more details on wiring in the resistor? Thanks in advance
 
You must log in or register to reply here.
Top