have an old hyster 50 has about 10700 hrs on it. Every once and a while it doesn't want to start. It turns over, but doesn't want to fire up. If left alone for while and then come back it sometimes starts, sometimes it takes a couple of days. Then it's good for while anywhere from hours to days. Have changed the mixer, and done a tune up (spark plugs, wires, rotor, and cap). did an oil change and checked the filter. Went through wire harness and checked for any breaks cuts or burns. I don't have any books or schematics so im going into this blind. Any thoughts or ideas would be help greatly. Thanks.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
hyster 50 forklift
- Thread starter Dr.Dc
- Start date
