joereyno
Member
why did the grease fitting on the idler adjustment shaft turn to the bottom? how can i turn it back so i can put grease in from the side? this is a kobelco sk200lc mark iv excavator.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
idler adjustment problem
- Thread starter joereyno
- Start date
Kyle Helmke
Well-Known Member
it just turns there is suppose to be a little keeper tab on the rod that sits in a piece of angle but it's usually gone. if you move you track so most of the tension is off the idler you should be able to twist the rod to line the fitting back up
uffex
Senior Member
Good day
May be of help.
Kind regards
Uffex
May be of help.
Kind regards
Uffex