the industrial 3010 had a hydraulic pump on the rear power take off shaft that ran the the back hoe and the loader. does any one know how many gallons per minute this pump put out and what the pressure was. there are no tags of any kind on this pump.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
john deere 310 industrial
- Thread starter GRUB HOE
- Start date
Any tags/serial number on tractor? If it’s a gear pump you can calculate the displacement by measuring the center section and knowing the rpm.or check with a flow meter with needle valve and pressure gauge. Are you having trouble with it or going to run something different with it?
Diesel Dave
Senior Member
I assume the machine has a 720 loader with sn# 1999 and below.
An operators manual # 0MU12905 would have that hydraulic pump spec in it
An operators manual # 0MU12905 would have that hydraulic pump spec in it