I been searching for a kit to replace the seals on the backhoe control valve with no luck. Is there some terminology that I'm missing? Ive been searching with keywords like deere "410c backhoe control valve spool seal kit" there is a kit that keeps popping up on amazon but its for a diiferent tractor. Thanks in advance.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
John deere 410c backhoe spool valve
- Thread starter Ronn
- Start date
mg2361
Senior Member
Thanks again! I found the parts, the first seal kit was around 30 bucks, and the spool seal kit is around 120 bucks. My only reason for needing the seal kits is because I want to change the deere controls over to cat controls, and the procedure (which I think you gave me) has you swap spools and relief valves, then hoses, but it says to replace the seals. My question is do these kits have everything for all the spools in the backhoe control valve or is it only 1 spool per kit? Thanks a bunch
mg2361
Senior Member
Kit "A" should be for the whole control valve and kit "B" would be for individual spools (1 kit per section) which would not include o-ring's for between the sections.
If you look up the parts at https://partscatalog.deere.com (shown below) the parts listing there will show the "A's" and "B's".
thepumpguysc
Senior Member
- Joined
- Mar 18, 2010
- Messages
- 8,508
- Location
- Sunny South Carolina
- Occupation
- Master Inj.Pump rebuilder
That "trips my trigger" when they don't include everything to do the job.!!!
Even the simplest of things, like a gasket or oring.. WHY.??
U go get a thermostat for your car/truck, get home & theres NO GASKET..
U go get a fuel pump/supply pump for your car/truck, get home & theres no gasket..
But a GOOD parts guy will tell u.. BUT those are hard to find anymore.
They even do it in fuel injection..
MOST of the kits don't have the mounting gaskets OR the inlet & outlet fuel line gaskets.. or the turbo line gaskets..
& don't get me started on INJECTORS.. they don't even SHOW the parts or part #'s FOR the return or bottom gaskets..
They SAY, that's an engine part.. HOW could it be an engine part when it goes on YOUR injector.??
I feel horrible telling a customer, I'm sorry but you'll have to go to JD or Perkins to get the rest of your parts.!!
Even the simplest of things, like a gasket or oring.. WHY.??
U go get a thermostat for your car/truck, get home & theres NO GASKET..
U go get a fuel pump/supply pump for your car/truck, get home & theres no gasket..
But a GOOD parts guy will tell u.. BUT those are hard to find anymore.
They even do it in fuel injection..
MOST of the kits don't have the mounting gaskets OR the inlet & outlet fuel line gaskets.. or the turbo line gaskets..
& don't get me started on INJECTORS.. they don't even SHOW the parts or part #'s FOR the return or bottom gaskets..
They SAY, that's an engine part.. HOW could it be an engine part when it goes on YOUR injector.??
I feel horrible telling a customer, I'm sorry but you'll have to go to JD or Perkins to get the rest of your parts.!!