cleattrack24
New Member
Machine will not engage into front wheel dr , put in a new solenoid and switch , both working and moving fine but no 4wd ?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
John Deere 710G Loader Backhoe sn: 954062
- Thread starter cleattrack24
- Start date
mg2361
Senior Member
Welcome to HEF cleattrack24
!
That circuit requires pressure to "disengage" the MFWD, and no pressure to engage the MFWD. Was the pressure to the MFWD checked (the test port between the bottom 2 solenoids)?
!That circuit requires pressure to "disengage" the MFWD, and no pressure to engage the MFWD. Was the pressure to the MFWD checked (the test port between the bottom 2 solenoids)?
cleattrack24
New Member
No sir , only changed the solenoid and switch , its getting full voltage and the solenoid is activating , repair manual says mfwd is spring applied and hydraulic pressure released , possibly the spring failed inside or can the incorrect pressure cause this to malfunction ? Do you know what the port pressure should be ? Thank you sir , any additional input would be appreciated
mg2361
Senior Member
cleattrack24
New Member
Will do , Thank you