KOBELCO SK135SR-1 Travel Low Pilot Pressure

[TKM5890]

The travel power is weak, and when I checked the pilot pressure using the service menu,
I noticed it was low: 3.5V and 23K.
Other pressures are at 4.8V and 30K. I tried tightening PR1 by half a turn, but there was no change. Could someone advise me on the adjustment procedure?"

 

[Kobe Steel]

Your secondary pilot output control pressure from the travel pilot valve is regulated so adjusting the pilot pressure input may not show you a change in secondary output pressure. Your travel pilot pressure looks to be within the specifications you have listed from the manual. Try doing cycle test and see if any other functions are slow or not within the manuals allowable specifications.

best regards