• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

kubota V1902 shop manual

M

moss

Member
Joined
Mar 31, 2014
Messages
16
Location
Maha Sarakham Thailand
Hi all,

Does anyone out there have a shop manual for a Kubota V1902 shop manual.

It's the same donk thats in a NH 555 or KH 52 excavator.

Thanks in advance
Moss
 
M

moss

Member
Joined
Mar 31, 2014
Messages
16
Location
Maha Sarakham Thailand
Thanks Lantraxco,

I was looking at doing a rebuild on this one but once I pulled it down I found a crack in the block so I will just put in a donor one as there are plenty kicking about here.

Perchance you wouldn't have any manuals,shop and or parts for a PC60-3 would you?

Thanks again
Moss
 
M

moss

Member
Joined
Mar 31, 2014
Messages
16
Location
Maha Sarakham Thailand
Yep that is what I've been using,so far as you say no issues either.
A shop manual would be nice though just for tolerences ,torque etc.

We are in the bush up here but I like to do things to some degree of accuracy ,even given most of the gear is old and been messed with alot.

Moss
 
You must log in or register to reply here.
Top