Canadian_digger
Senior Member
So I've been inspired by some of the post of people painting there own equipment in the forum and thought I would try it out myself. I have some done some touch up painting before but nothing major. My oldest backhoe was looking really bad and I decided to start with the loader to see how it would turn out. I think it tured out well. It was a lot of work but what a difference.
All I used are some basic tools. Angle grinder with flap wheel and wire wheel. Die grinder with striping wheel. Electric sander. Sand paper. Small sponge paint roller and brush.
All I used are some basic tools. Angle grinder with flap wheel and wire wheel. Die grinder with striping wheel. Electric sander. Sand paper. Small sponge paint roller and brush.