Hello, I just bolted the engine on my series III Cat D4C and I don't have the manual. Does the bell housing/clutch housing where the flywheel slips over the clutch gear need any sort of oil? When I took the engine off there was a tiny bit of residual in there but nothing major. There is a red plastic plug on the top but no dip etc and I'm wondering if anything goes in there. Everything I have read online says its supposed to be dry but I want to make sure..
I'm just running into town and I would like to know if I need to pick anything up.
Thanks in advance!
I'm just running into town and I would like to know if I need to pick anything up.
Thanks in advance!