mudober
Well-Known Member
So I am quite happy that I have been able to get these two out. After some research I done I have found a way that works for me and I am going to share it with you. I used stainless steel rods to weld around the inside of the bushings twice then welded the angle iron to the bushing. Let it cool for about five minutes and then used a squirt bottle with water to cool down the just the bushings and angle iron. Then using the broken disc axle and hammer I was able to drive it out. I’m so happy that I didn’t have to bother anyone else and was able to do it on my own. Putting this boom back on I will need help with tho but that’s ok.