I’ve a sany 26u with hammer and rotation lines but the left button on the left joystick is not working. The switch is working as the voltage is changing and the valve itself is working. All the wiring has been checked and no problems can be found. My mechanic believes it was never switched on from factory and is looking for the password to get deeper into the machine. Do anyone know it?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
LACHAU
Senior Member
Please try this procedure.
Unfortunately I’ve tried all these and made no difference
LACHAU
Senior Member
Have you checked the "FLOW RATE INFOMATION" of optional equipment?
Yes they’ve all been adjusted, I believe the problem may that the joystick was never enabled from factory, but I need the password to access that information
LACHAU
Senior Member
Give up! You must contact Sany's dealer to resolve that password.
