-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Sk550lc z030 fault code
- Thread starter Mick1104
- Start date
LACHAU
Senior Member
Welcome HEF.
Next time, please post in detail about your machine, including the SK550DLC dash xx and serial number, or take some pictures.
There is a practical experience that if you complete all three steps (A, B, and C) but still cannot solve the problem, then you should press stop immediately after completing the "A" adjustment.
You also need to remove the 2 PSVs of the pump to check and clean them carefully.
Next time, please post in detail about your machine, including the SK550DLC dash xx and serial number, or take some pictures.
There is a practical experience that if you complete all three steps (A, B, and C) but still cannot solve the problem, then you should press stop immediately after completing the "A" adjustment.
You also need to remove the 2 PSVs of the pump to check and clean them carefully.
Last edited: