Southbus
Well-Known Member
Hello everyone, here I am again looking for help to solve a problem with my Champion 720R year 1988, serial number 720-187-134-19089-88.
On some occasions, to turn on the machine I cannot move the steering wheel or press the clutch, both are very hard and I think they have no hydraulic pressure, sometimes I have to wait 20 or 30 minutes, with the engine running, to get those functions back . I think that perhaps there is a problem with the pump or some device that does not allow the passage of oil to these controls.
The hydraulic oil level is correct and the filter has about 200 hours. This happens on the first ride of the day and all the other hydraulic functions of the machine work without problems.
Can you give me any advice to start this new repair adventure?
thank you so much
On some occasions, to turn on the machine I cannot move the steering wheel or press the clutch, both are very hard and I think they have no hydraulic pressure, sometimes I have to wait 20 or 30 minutes, with the engine running, to get those functions back . I think that perhaps there is a problem with the pump or some device that does not allow the passage of oil to these controls.
The hydraulic oil level is correct and the filter has about 200 hours. This happens on the first ride of the day and all the other hydraulic functions of the machine work without problems.
Can you give me any advice to start this new repair adventure?
thank you so much