Takeuchi Tb175 stop solenoid

[Nikola]

Hi everyone, I have 2006 takeuchi tb 175.
My problem is stop solenoid, it has 3 wires: ground , + that lasts for 3 seconds and + that should be always when ignition is on. During inspection i made mistake and my probe-lamp touched ground while it was connected to +(one that should always be ) then itiit sparked. I checked fuses none failed, checked wiring between solenoid and instrument cluster and that is okay too. Did anyone have this kind of problem I would be grateful if someone can help.

 

[heymccall]

Double check all fuses by tip probing the fuses while they're still installed, with the key on.
I'll dig up wiring schematic later.

 

[Nikola]

Tried, but didn't work...

 

[heymccall]

Schematic is post #5 here.
https://www.heavyequipmentforums.co...runs-but-no-console-lights.50018/#post-873930

 

[Nikola]

Tried to follow wiring diagram but wire goes from solenoid directly to instrument cluster , and I don't know where to dig now