Takeuchi TL26 Bucket Cylinders

[Garrison Cook]

Hey all, I have a 99 Takeuchi TL26 and need the 2 bucket cylinders. They are not available from Takeuchi any longer. Any help would be greatly appreciated.

 

[Tinkerer]

Did something bad happen that you need two cylinders ?
Here is one source that I had quote from for an axle not long ago. ----> http://amsconstructionparts.com/takeuchi/tl26/skid-steer/hydraulic-cylinders/parts

 

[Craig Klausen]

Check out a used construction equipment parts company. There are many of them out there, but make sure they have the product in stock. You can try our company, H&R Construction Equipment Parts, at https://www.hrparts.com/parts/cylinders. You can also search Machinery Trader. Good luck.

 

[skata]

Can you get away with just new seals?
https://www.ebay.com/itm/350698961861

 

[KSSS]

Taki probably saved you from a heart attack when you saw the price on new anyway. I would also see if you can get them rebuilt.

 

[heymccall]

Bucket cylinders for a TL150 are $675ea. Each side is a different part number.

When I looked up my TL150, the part number superceded.
Have you verified that there isn't a supercede # for yours, that would be available?

 

[heymccall]

Yours are same part # for either.
The barrel is $365.
The rod is $400.
Takeuchi seal kit is $101.

These are for the drawing below.
Serial # 2620002 and up.