Hi all, first post here. I have googled for this. And I have already got the service manual, but that doesn’t help for this. I guess the original operators manual would.
I have a warning light on. I assume it’s telling me the hydraulic fluid is low… perhaps. It’s the second from bottom on the picture.
Can anyone tell me for certain what it means?
Also, I have the engine stop light on. It’s been running a bit rough for a while. I just adjusted the valve clearances and it runs well now, but the engine light is still on. Does it need to be reset, or is there still something wrong..?
Thanks,
Adam.
![IMG_5361.jpeg IMG_5361.jpeg](https://www.heavyequipmentforums.com/data/attachments/290/290004-19c3c30d7ce4d46f1fa9ce98685cb121.jpg)
I have a warning light on. I assume it’s telling me the hydraulic fluid is low… perhaps. It’s the second from bottom on the picture.
Can anyone tell me for certain what it means?
Also, I have the engine stop light on. It’s been running a bit rough for a while. I just adjusted the valve clearances and it runs well now, but the engine light is still on. Does it need to be reset, or is there still something wrong..?
Thanks,
Adam.
![IMG_5361.jpeg IMG_5361.jpeg](https://www.heavyequipmentforums.com/data/attachments/290/290004-19c3c30d7ce4d46f1fa9ce98685cb121.jpg)