• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Winter use chains

Blue-Fox

Well-Known Member
Joined
Dec 27, 2022
Messages
202
Location
99611
Occupation
Oilfield Owner/Operator
Hey guys its been a long stormy winter here in SC Alaska, just going huckledy buck getting ready for a storm tomorrow and looking at new chains here. Have any of you guys used these Trygg Fast Trac style chains on / off highway ?? We are mostly "working" on secondary roads and most often dont use chains but when we need them .... the ladders are almost the same price and seem to wear fast. Seems like these would be more points on the ground and less wear on the metal.

Thanks in advance
Trygg Chains.PNG
 

Welder Dave

Senior Member
Joined
Oct 11, 2014
Messages
17,987
Location
Canada
Depends somewhat on how aggressive of chains you want/need. Trygg heavy duty are good chains with round hardened studs on them. You could also look at Laclede chains if you want something less exexpensive.
 

cuttin edge

Senior Member
Joined
Nov 9, 2014
Messages
4,233
Location
NB Canada
Occupation
Finish grader operator
Been a long time but I remember they used to make the chains here. There were 2 cardboard almost like a 45 gallon drums full of the cross chain that you had to cut to length. I think they went for scrap in the end
 

Blue-Fox

Well-Known Member
Joined
Dec 27, 2022
Messages
202
Location
99611
Occupation
Oilfield Owner/Operator
Been a long time but I remember they used to make the chains here. There were 2 cardboard almost like a 45 gallon drums full of the cross chain that you had to cut to length. I think they went for scrap in the end
For many years of my younger life I built chains, rebuilt them and welded on them to hard face them. Labor was much cheaper back then...
 
Top