TDF
Member
Hi all been going meticulously through the 1971 exmilitary P&H 20 ton I bought a year ago. She hadn't been ran in many years but is super low hours. About 200 on both crane and carrier. Stripped it down got the carrier running good and drove it the 50 miles home. Spent a bunch of time going through it getting everything working and put the boom and outriggers back on and hoisted the boom up in the air under it's own power yesterday. Probably the first time that has happened this century. The rear drum had some old cable on it as did the boom winch (I replaced both) so they both had the wedges used to anchor the cable in the drum. However the front drum was empty when I bought it on the auction. I've now been everywhere through this thing been under every panel etc. And that wedge is long gone. Does anyone know a good source for those wedges? I took some measurements off the 5/8 wedge that is in the rear drum. I'd like to get a 3/4 for the front drum just because I have a considerable amount of good 3/4 wire rope on hand.
Thanks
TDF
Thanks
TDF