Tags
Senior Member
With the heat on it is drying out a wet connection or drying a wet relay
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Takeuchi TL130-Problems-Wont Move
- Thread starter JD7210
- Start date
With the heat on it is drying out a wet connection or drying a wet relay
yohe41
Active Member
I figured that, just was hoping someone could point me towards what connection
Tags
Senior Member
I would start with replacing the relays. I have a friend that has the Gehl version of that machine and he had the same issue a few weeks ago. He replaced the relays and was all set.
Duh. My email is rswen78683@aol.com. Thank you.
heymccall
Senior Member
I know that nobody is listening, but, if smacking the machine panel makes it work, this relay unit needs opened up and the cold solder joints need resoldered. I believe my TL150 machines have two of these. The other relays dont come apart, or look different. The ones that look exactly like this are the problem.
Or, you can buy the relay, only to have it happen further down the road. They're only $60 apiece. I've never been back in on any that I've soldered.
Or, you can buy the relay, only to have it happen further down the road. They're only $60 apiece. I've never been back in on any that I've soldered.
hey. i'm listening. thanks. i will open mine up and check the solder.
I opened up both of my relays. The circuit board looks different than yours. And I can't see any cracks in the solder. I may just reheat the solder joints anyways.
Where can you buy them for $60? I see them for over $400.
heymccall
Senior Member
Even with you're out of focus (fuzzy when zoomed) image, I see at least one cold (cracked) joint.
I resoldered anything that looked questionable. Hopefully it works. But where can I buy these?
I have a TL150 which starts then sometimes the hydraulics would work after 10 minutes of warming up, then it became 20 minutes, then 45.., now not at all. I'll try your advise on 8/16 and see if re-soldering the black relays is the solution. Thx.
Atl_mechanical
New Member
I have a tl 140 that's doing the same thing starts but nothing works how do you determine witch relay is the safety none of the pictures posted look like what I have
What does yours look like?
Atl_mechanical
New Member
It ended up not being a relay. There a safety solenoid under the cab by the left joy stick tha was the problem
@tool_king I just bought a 2004 TL 130 yesterday. Ran fine when I bought it, loaded it on the trailer and now nobody is home at the controls when I got home from hauling it to unload. Thinking it's this relay thing since I've checked the switch already. If you'd be so kind when you have a minute please email me any owners manuals and workshop manuals for this machine. I've got to fix a couple of rollers and need to find this relay people are talking about so I Thankcan get it off my trailer! Thank you sir. bee_morris@hotmail.com
@tool_king thank you! bee_morris@hotmail.com
It's one of the two on the far right.