• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Noble grade

  1. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, so you were correct, all the voltage checked out....Except for the voltage coming out of he lcd display.Only 2,5 volts was coming out of that unit which is hooked to ( my problem) 1150 $ for the part and some service calls from United Rentals customer equipment repair division and a grand...
  2. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, sooooooo.. i have had no luck, the voltage drop out is back and i called mercy and called United rentals mechanic ( they have a division that only does customer equipment for a flat $175 hr and since i am a existing customer for 20 years plus it made sense ) i had also dropped the skid...
  3. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, so i now have power to the tcu due to a dirty plug i believe. When i scroll through the gear menu in the service menu i do not have any blank areas where the icon for on should for gear selection. The solenoid menu also stated that everything is working. But, the minute i try to to put it on...
  4. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Rad, thanks wish me luck , im going in.
  5. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, well driving the skip loader around lasted about 8 minutes and then went back to this active fault code. I tried to clear it in the service menu, it said it cleared it, restarted the machine and it still wont move again. It was worth a try, lol.... anyways, let me know what you suggest, i...
  6. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, thanks again, the second active fault was the back up alarm, i had it here at my place and disconnected it to not annoy the neighbors. The others are the gps and jd link for tech support through Deere. I disconnected the gps link to Deere. The TCL code is now stored, thank you for showing me...
  7. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    This is what i found to be a little odd. Thank you.
  8. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, thanks again for helping me, i cannot tell if it is active or stored. I believe it is active. When i went to the gear section where it showed forward neutral and reverse with the off showing off to the right the forward and neutral icon was showing off but would blink to a half looking on...
  9. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Thank you for helping me. it says transmission direction switch FMI=5 current below normal or open circuit count 5 SPN903FMI 5 it also has a (J1939)3 transmission #1-E6 on the top of the Ancel 3600 screen, The parking brake light goes off when released and the machine is in neutral and can...
  10. Noble grade

    John Deere 410k - wont move (return tdc to neutral message)

    Hi, my 2015 Deere 210L is having this problem also. The code reader and tractor diagnosis screen says Return TCL ( transmission control lever ) to neutral. I had cleared the code with the scanner and it would move around for a little bit then go into neutral again, when i replaced the shiftier...
See more
Top