• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    Hamm 3414P Roller

    G'day Guys I have the entire front drum assembly out of a Hamm 3414P Roller for a re-race and reseal of all components. Just chasing a manual to assist with reassembling the final drive and the through shaft for vibration if anyone could help out would really appreciate it, Cheers
  2. G

    D6N - LGP Dozer

    Hey guys, we ve got a D6N dozer (MG5 serial prefix) with an oddball issue with the transmission/back end, there is a distinctive knock/bang in the back end when changing from foward to reverse. The noise is not there all the time, can come into it after 2-3 hours work, it gives the symptom that...
  3. G

    Wa500-6 Komatsu transmission issue

    Hello, The main implement pump (variable displacement piston pump) had failed. Thus leaking oil into the trans, we removed all 6 pumps from memory from the machine stripped and resealed 5 other pumps and replaced the piston pump with an genuine unit. Out the door she went. Upon re assembly we...
  4. G

    Cat challenger MT765b

    Gday, Wondering if anyone has some literature on the removal and replacement of track assemblies on a MT765B cat challenger, seems everyone around here stays away from them, and sis or caterpillar manuals online has nothing on how too remove and replace them??? Cheers
  5. G

    Volvo ec140B

    G'day Tc tractors, Firstly Id like to apologise for the late reply as I didn't receive the post updates for some reason via email, I'm very keen to check this out once the machine ec140 Volvo returns from work, I'll definitely let you know how it goes, and secondly we have been extreamly busy...
  6. G

    Volvo ec140B

  7. G

    Volvo ec140B

    G'day Guys, We have a troublesome Ec140B Volvo that smokes heavily under load, we have just had injectors done, compression tested engine (each pot at 500psi within 5-10 psi) checked boost under load (14psi and holding well) clean fuel, clean air filters, and still left scratching our...
  8. G

    Case 440CT compact trackloader

    Hi all, We are looking to purchase 2 complete and operational final drive assemblies complete with motors, there is no parts available in Australia at all for these particular model drives, yet the case dealership brings them in and sells them, Any help would be great, Cheers
  9. G

    pc50uu hydraulic problems

    Hi Jeff, We had a problem once before that did take me some time to find at the time but behind the seat was a pattern control changer, small leaver assembly that had been bumped, it was halfway between backhoe and excavator pattern it had some strange faults that where quite hard to trace...
  10. G

    Cat 328D Work tool malfunction

    Morning, We have a Zero tailswing 328D (Serial prefix - RMX) excavator with a fault coming up on the monitor panel stating "work tool malfunction" :Banghead the tilting mud bucket will only tilt in on direction correctly with full operation and wont quite tilt back the other way, we have ET...
  11. G

    Zx27-3 CLR Hitachi Excavator

    Evening all, :Banghead Have been given the job to make a travel alarm circuit on a brand new hitachi zx27-3 CLR. It is definitely an import to Australia and as far as I can see there is no provisions in place for this system. I was wondering if anyone else has come across this on this...
  12. G

    12 G Diff banging and clanging

    Evening all, Have had a 12G turn up in the workshop with an unusual banging noise through the back end and upon initial inspection one would think it is coming from the transmission, but we have checked transmission pickup screen for debris and is clean, unit has around 24,500 hours on it...
  13. G

    Cat 935C x 2 for sale on the side of the road. Any good? What to look for?

    Hey jeembawb, Did you have any luck with a finding a phone number on your phone mate? I would really appreciate it,:rolleyes: Cheers
  14. G

    Cat 935C x 2 for sale on the side of the road. Any good? What to look for?

    Thanks Jeembawb, Can't quite read a phone number from the photo, if you could see one I would love to give them a call, Cheers
  15. G

    Cat 935C x 2 for sale on the side of the road. Any good? What to look for?

    Hi jeembawb, Are these 935C's still for sale were chasing a good one? Cheers
  16. G

    Cat 325D overheating engine and hydraulics

    Evening, Thank you all so much for your help, went back to cat with the service letter, they are going to fit new fan hub, due to the hours and the age of machine they will cover 1/2 the labour costs and 1/2 the cost of a complete fan hub ($1300), the product support rep did mention issues...
  17. G

    Cat 325D overheating engine and hydraulics

    Evening, We have a 325D ( SCR serial prefix with 4700 hours )that is overheating both engine and hydraulics, we have blown out with shop air the hydraulic cooler and radiator and then washed it with light pressure clean the core it is now imactulatly clean. Did not seem to make much of a...
  18. G

    Recommended repairer in the Brisbane, Australia area Kobelco SK70SR

    Hi Andrew, We use a small workshop, Heavy equipment repairer in Brendale QLD, he has a couple of service units, what exactly are the controls doing that require service? Let met know if you would like me to pass on details.
  19. G

    Komatsu GD555-3 graders

    Evening all, I'm goin to inspect some Gd555-3 graders tommorow 2007 models with 2900 hours, was wondering if anyone has had much experience with them and do they have any major issues, have heard that they have had some tandem failures early in life on some early models not sure if this is an...
  20. G

    Case 455c transmission shaft

    Evening all, Would any one know where I could purchase and input shaft for a Case 455C, part number - G106413, through chasing parts in Australia case tells me it has been discontinued, hopefully someone out there can supply one or point me in the right direction of where we could get one...
Top