• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    Hamm 3414P Roller

    G'day Guys I have the entire front drum assembly out of a Hamm 3414P Roller for a re-race and reseal of all components. Just chasing a manual to assist with reassembling the final drive and the through shaft for vibration if anyone could help out would really appreciate it, Cheers
  2. G

    D6N - LGP Dozer

    Hey guys, we ve got a D6N dozer (MG5 serial prefix) with an oddball issue with the transmission/back end, there is a distinctive knock/bang in the back end when changing from foward to reverse. The noise is not there all the time, can come into it after 2-3 hours work, it gives the symptom that...
  3. G

    Cat challenger MT765b

    Gday, Wondering if anyone has some literature on the removal and replacement of track assemblies on a MT765B cat challenger, seems everyone around here stays away from them, and sis or caterpillar manuals online has nothing on how too remove and replace them??? Cheers
  4. G

    Volvo ec140B

    G'day Guys, We have a troublesome Ec140B Volvo that smokes heavily under load, we have just had injectors done, compression tested engine (each pot at 500psi within 5-10 psi) checked boost under load (14psi and holding well) clean fuel, clean air filters, and still left scratching our...
  5. G

    Case 440CT compact trackloader

    Hi all, We are looking to purchase 2 complete and operational final drive assemblies complete with motors, there is no parts available in Australia at all for these particular model drives, yet the case dealership brings them in and sells them, Any help would be great, Cheers
  6. G

    Cat 328D Work tool malfunction

    Morning, We have a Zero tailswing 328D (Serial prefix - RMX) excavator with a fault coming up on the monitor panel stating "work tool malfunction" :Banghead the tilting mud bucket will only tilt in on direction correctly with full operation and wont quite tilt back the other way, we have ET...
  7. G

    Zx27-3 CLR Hitachi Excavator

    Evening all, :Banghead Have been given the job to make a travel alarm circuit on a brand new hitachi zx27-3 CLR. It is definitely an import to Australia and as far as I can see there is no provisions in place for this system. I was wondering if anyone else has come across this on this...
  8. G

    12 G Diff banging and clanging

    Evening all, Have had a 12G turn up in the workshop with an unusual banging noise through the back end and upon initial inspection one would think it is coming from the transmission, but we have checked transmission pickup screen for debris and is clean, unit has around 24,500 hours on it...
  9. G

    Cat 325D overheating engine and hydraulics

    Evening, We have a 325D ( SCR serial prefix with 4700 hours )that is overheating both engine and hydraulics, we have blown out with shop air the hydraulic cooler and radiator and then washed it with light pressure clean the core it is now imactulatly clean. Did not seem to make much of a...
  10. G

    Komatsu GD555-3 graders

    Evening all, I'm goin to inspect some Gd555-3 graders tommorow 2007 models with 2900 hours, was wondering if anyone has had much experience with them and do they have any major issues, have heard that they have had some tandem failures early in life on some early models not sure if this is an...
  11. G

    Case 455c transmission shaft

    Evening all, Would any one know where I could purchase and input shaft for a Case 455C, part number - G106413, through chasing parts in Australia case tells me it has been discontinued, hopefully someone out there can supply one or point me in the right direction of where we could get one...
  12. G

    Hyundai R140w-7 wheeled excavator

    Hi, We have one of these little gems filling the rear diff with hyd oil through the brake packs on the rear axle, not sure how much of a job it would be to replace o rings in the brake group? I have no shop manuals on this particular machine was wondering if anyone had ever worked on them and...
  13. G

    Komatsu pc200-8

    Hi guys, We are about to reseal 2 final drives that are showing high quantities of dirt and debis in routine sampling, was wondering if anyone has a procedure to adjusting bearings in final drive when refitting after replacing duo cones? Any advice would be great, Thanks
  14. G

    Cat 972H wheel loader

    Hi there, Not sure if any one is up there on serial number prefixes but a client of ours currently has 2 of 972Hs in there loader fleet with a serial prefix of A7G, they are Belgium built machines as far as I am aware looking at the build plate, was wondering if anyone has read the build...
  15. G

    Cat 3306 engine

    Evening all, We are about to fit some new pistons and sleeves in a 3306DI engine (12H grader) and were wondering what every one else uses for lubrication around orings when pressing in sleeves in the past we have used some silicon grease not really sure if that is recommended but has done...
  16. G

    Case 410 skid steer engine

    Hi all, Was wondering if anyone knew where we could purchase an engine for a 410 case bobcat with and N5M . . . . . Serial prefix, here in Australia they are fitted with a Shibaura engine ( and hopefully everywhere else around the world) and are definitely not a great success, to purchase a...
  17. G

    Clark S205

    Hi there, Was wondering if anyone had a procedure on setting up and neutralizing machine, we are replacing some worn out pump linkages and would like it to neutralize when complete , Thanks in advance Pete
  18. G

    Cs563 rollers

    Hi Anyone ever removed cabs from cat cs563e rollers to fit into shipping containers? I have been asked to quote to strip 4 of them and fit into containers, not sure how many hours this would take? Cheers
  19. G

    Doosan Dx300 excavator

    Hi, I need to purchase a doosan dx300 cab and have it shipped to australia, not sure if any one would k ow where we could source one of these? Cheers
  20. G

    Cat 12G Engine rebuild

    Hi, We need to carry out rebuild on 3306 engine in a cat 12g, can engine come out of machine and leave tranny in place or do engine and tranny come out in 1 hit as a unit? Pretty confident in chassis would nt be possible with limited room under engine. Any advice would be tops Thanks
Top