• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    The new replacement

    You all be selling all those big machines when you look at this!!!
  2. G

    963 drive motor

    It appears the end plate on one of my drive motors is seeping. Before I take it off is there anything I need to be worried about flying out of it and is it oringed or a gasket sealing this? This is a early 21Z serial number machine.Thanks
  3. G

    Track pad bolts

    I bought a dead 963 with real good 22 inch double grouser pads. Being the tight ass I am I'd like to try and save the track bolts as they are in real good shape. My inch impact wouldn't budge them. I did heat one nut red hot and got it loose. Has anyone used an induction heater on these to get...
  4. G

    limb saw

    looking at these which one is best, chain saw or circular saw for a limb saw? I'm leaning toward a circular thinking it wouldn't get pinched or torn up as easy as a chain saw. Probably going to put it on the quick attach on the mid size excavator for more reach. I have quick couplings on the...
  5. G

    3306

    They made a 3306 in a direct injection and an idi motor. Is the block and crank interchangeable between these two motors. I have a idi core motor and didn't realize it till we started looking at them. I'm hoping I can use the head off the blown motor and do a sleeve and piston kit for a di motor...
  6. G

    963 3304

    Needing at least a good short block, these things seem to be getting really hard to come by. What all did they put them in and how long did they make them? I threw a rod on mine, just guessing right now the upper end is all I have to work with.
  7. G

    1996 210-3 hyundai

    My exc took a crap on me. It started with the throttle not working so I bypassed the electric throttle to finish a job. Got it home and finally decided to work on it. Started it and messed with the control buttons changing the digging setting. Throttle worked somewhat but switching to manual...
  8. G

    tall brick building

    I might have a tall brick building coming up that's being condemned. It's three story with an alley about 8 foot wide on one side and a single story on another. The rest faces two streets and a four way stop. I'm a little nervous about this one, I can only work from one street as the other one...
  9. G

    973 throttle

    On one of my 973's the guy I got it from adjusted some stuff on the hydrostat linkages. I'm wishing he hadn't. Running it on a big pond the last few days if you back the throttle off just a little it runs faster. I changed the hydro filter thinking that was the problem, it helped but didn't cure...
  10. G

    running hot

    Both of my 973 and my 963 run hot. I've washed out radiators to no avail. The 63 has a newer radiator which didn't help. Do they make a higher cfm fan or smaller pulleys to move more air in these things? I realize age has something to do with it but running yesterday it ran 230. I hate running...
  11. G

    drive shaft angle

    I lengthened the frame on my dump truck when I put it together and had to add a second shaft and carrier bearing. I've always had a slight vibration and it finally took the rubber out of the bearing. The first shaft has the carrier bearing and the yolk that bolts on. I had the ears lined up and...
  12. G

    hancock pull paddle scraper

    How are these to use and maintenance wise? We could use a scraper every now and then but not enough to sink much money in one. More wanting than justifying one. I see them with pto and hydraulic chain drives.
  13. G

    telescopic cylinders

    I have a pair of hoist cylinders with two telescopes on them. They came off of a mid 60's two ton grain bed. I was thinking about rebuilding them but see no way to take them apart. Is there a chance you would have to cut the bottom off and bring the cylinders out that way. I pulled the screw on...
  14. G

    case pulling scraper

    Does anyone use the four wheel steer case tractors pulling smaller pans? I've never been around them and was just wondering.
  15. G

    hydraulic pin grabber

    Do these have hydraulic pressure to them all the time when you lock on a bucket? I would like to add one but wonder what it takes on the hydraulic side to make them work.
  16. G

    Demolation

    Started back on the school I was demolishing last year. Here's a few pictures before I got started and when I started today.
  17. G

    browny spicer aux trans

    I've found a 5531 spicer browny aux transmission and contemplating putting it in a 09 f350 I've put together. These are under direct and overdrive. The 09 has 4.10 gears with the 5r110 transmission and I've put a newly freshened 12 valve cummins in it. I don't need the under drive but was...
  18. G

    973 quit moving

    Talk about bad luck, I was cleaning up a brush pile today with the 973 I bought last fall. Everything was working great then I heard a loud pop and felt it then the machine quit moving. I'm guessing it broke the drive between the motor and pumps. The hydraulics still work which drive off of the...
  19. G

    hood interchange 9400 international

    I can't seem to find a right answer, I have a 1994 international 9400 and it seems hard to find hoods for these. Can a 1999 9400 be made to fit easy, they look the same.
  20. G

    zx75 ingersoll rand planetary

    One of my drive motors quit pulling today. I pulled the planetary cover and the little center shaft that sticks into I'm guessing an adapter stripped the splines and the piece it sticks into is stripped smooth. I'm just guessing the piece it sticks into is some kind of adapter that hooks to the...
Top