• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    Winch for TD-15C

    Could you get some pics of it? I haven't seen one that say that on it. Do the hoses for the lift cylinders come out of the side of the rad guard?
  2. R

    Don't laugh - how do I operate my D39?

    Enjoy your new machine John! They are a nice little dozer. You have things pretty much figured out, like they said, get someone else to unload it. There is a lever on the front side of the steering/shifter control stand that needs to be flipped up to unlock the shifter. Also be gentle after...
  3. R

    Winch for TD-15C

    I've never heard of a TD15A, unless you mean the old TD15-150 and 151 Series that started on gas, they were all sliding gear mechanical winches on them. Any winch on a TD15b or c would fit, Carco F-50, 50 and 60 models, the 60's had some issues with the plug below the accumulator ports blowing...
  4. R

    td25c low speed stg clutch ?

    Should be able to look in with a flexible mirror to see. It could have a worn pushrod & socket too. I never brought the book home so can't look up much.
  5. R

    Ih 175b

    Hi Jim As usual, need serial #, it could be the early one with the bellows seal or a later one with a metal face seal. I believe we have some new sprockets as well as used ones, need to know the bolt & dowel sizes, I believe there's only one pitch of track on the B Series. You know that TD15B...
  6. R

    Noise in Trans or Final 1980 TD8

    Good to hear that Dan. Let us know when you get the sample results.
  7. R

    Ih 175b

    Mr Hemi Have you got parts for your machine yet? We have a LOT of parts for these, new & used. Yes, there are a few places they can leak, rear main seal shows up by oil transfer, if it leaks externally at the back, it's more than the seal. Front seals are pretty straight forward. You can...
  8. R

    Geographical Track Loader use

    I may be able to shed a little light on the term high lift, I wasn't around in the hey day of track loaders here in BC, but there were many sold here starting with the Drotts in the 50's to around '62 ish, then IH track loaders . There was one built on IH crawlers & maybe others that was called...
  9. R

    Noise in Trans or Final 1980 TD8

    Hi Dan If that's 20 deg F, it may go on for 5 minutes or so, make sure there's no suction leaks. Yours should have the little strainer under the right side of the floor plate, check both hoses too. R59
  10. R

    td25c low speed stg clutch ?

    Not sure where yours is at S/N wise with the upgraded bellcranks, the earlier ones could break or the socket would get chewed out leaving the shoes with less clamping pressure. I'll check through some service bulletins to see when they updated them, that sounds like the most likely problem...
  11. R

    Noise in Trans or Final 1980 TD8

    Hi Dan sounds like you have a pretty nice machine there. They are a pretty reliable sturdy unit, 1980 is close to the serial # break for the change up to the "small" trans, it changed at S/N 9501, they are a strong trans too, just a lot more compact, basically the same trans is used in the...
  12. R

    td25c low speed stg clutch ?

    Hi Dirt gotta go out for a bit, but will get back to ya later. Russell
  13. R

    TD15C hydraulic troubles

    RDG is right, completely separate systems, both usually use 10 wt engine oil, but the hydraulic system is more forgiving. ALWAYS use 10 wt in the trans/ rear main frame though as it does multiple jobs, wet clutches, cooling etc. The trans level is checked in neutral with the engine idling, set...
  14. R

    Progress on the AW supper 300

    Hey Dwan WOW, I just finished reading the whole topic, nice work & a beautiful machine you have there! I have run various Champions & looked after a lot of road in northern Saskatchewan with 740's, the 6-71's made enough heat to keep from freezing. They also had electric controlled float...
  15. R

    1988 dresser td-7 dozer pricing help 300hrs

    Hi Pdoo2 Yes stumpers right, these are very good little tractors with no major issues, this one should be a Dresser with a 4BT Cummins in it. It could either be the seal rings, although they should be cast iron hook rings or maybe a sticky range selector valve. The trans filter is in the left...
  16. R

    How Did You Find Us?

    Hi I found this through a Google search, I was searching for Hough loaders. Russell
  17. R

    Dresser TD15E steering problem

    15E steering ? Hi 5ontop Red Power Magazine Forum is a great place for anything IH/Dresser/Dressta/Hough etc, theres a construction equipment board where this topic fits right in. I am an HD tech who does a lot of work on this line of machines. Dirtwhore is correct about the linkage, next...
Top