• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. O

    Kx91

    Hi Tony Just found this post from you and last night I had a similar failure on my 91-3. I have not removed the drive yet but I did drain the oil and I had no signs of metal in it which makes me suspect its the same shaft as yours that failed. If you get a chance could you tell me how you...
  2. O

    My kubota kx91-3 quit moving

    Thanks amazin I did do that hoping for the best but it's not... ya Jack my gear lube smelled terrible too which surprised me since there was less than a year since I replaced the oils. I think theres about 3,300 hrs on it or so.
  3. O

    My kubota kx91-3 quit moving

    Hi guys I think I just became a victim of the broken final drive. My KX91-3 just lost any movement on the right drive motor. It makes a whiring sound but won't move? I pulled the oil plugs and there is no sign of any steel flakes in the oil. Any ideas what this might be and also how to remove...
  4. O

    How do I remove this hose????

    How do I remove this hose???? ( DONE!!) Hey guys you are indeed wizards:notworthy. I tried the hammer and chisel and after 4 wacks it was loose and I could remove it by hand! Thanks so much for your help with this I really appreciate the advice. Scott:beerchug
  5. O

    How do I remove this hose????

    Thanks Joel I'm going to attempt this method today, sorry about the tooth man I know exactly what your saying about slipping wrenches. I was working on my wifes van once (brakes) and the wrench slipped and I smashed my knuckles then some how my 2lb hammer laid a major beating on the side of the...
  6. O

    How do I remove this hose????

    Thanks guys for the replys. I will try the wrench and hammer technique on it atleast it will give me some joy to beat on the damn thing for a bit!!!
  7. O

    How do I remove this hose????

    Ok I some hoses out of the way but I still cant get this one to budge:Banghead I'm thinking about trying to cut the steel line to get a wrench on it, using heat but I'm afraid of damaging any O rings Could it be in with lock tite? The steel tube has some movement (swivel) to it?
  8. O

    How do I remove this hose????

    Ok heres the pics Its the 3rd one down, I tried cutting my spanner but it just spreads under load and slips on the nut.?
  9. O

    How do I remove this hose????

    Hey guys Today I blew one of my hydraulic hoses on my KX91-3, one that goes to the arm piston. I'm at a loss as to how you loosen off the nut at the control stack?? It looks like it is a 22mm nut but theres no way to get a spanner in there. I tried cutting a 7/8 box wrench to be like a brake...
  10. O

    Kubota buckets interchange KX41 - KX91?

    Hi guys I'm looking for a Q/C 12" bucket for my KX91-3 and I found one from a KX41, I was just wondering if they are the same dimensions? Need your valuable input before I purchase it. Thanks Scott
  11. O

    Kubota KX91-3 boom pivot bushing?

    Thanks Jack for the reply,, by chance would you still have any part numbers? Scott
  12. O

    Kubota KX91-3 boom pivot bushing?

    Hi guys My KX has some play in what I would guess is the boom pivot bushing? I can see it moving back and forth while digging. Is it a big job to replace this bushing? Just looking for advice or info on this. Thanks Scott
  13. O

    Home made Kubota KX91-3 thumb

    The only thing I needed for the main pin is a bushing and a pin and no its not hardened its just 5/8 plate steel and doubled at the pivot point.
  14. O

    Home made Kubota KX91-3 thumb

    It's a 2004
  15. O

    Home made Kubota KX91-3 thumb

    Ya the mini ex had it preplumbed and the top mount was allready there
  16. O

    Home made Kubota KX91-3 thumb

    I thought I would share with you guys my build of a thumb kit for my KX91-3. I priced out some kits that were commercially available but they all seemed quite expensive so I decided to build my own. I started out by building prototypes out of plywood then I bought a cylinder at Princess auto for...
  17. O

    Servicing my Kubota KX91-3

    Hi everyone I just bought this excavator and I am changing all the oils and filters. I don't have a MSM "yet" I picked up all the oils and filters (except the hydraulic oil) from the dealer. There are 2 hydraulic filters that I got a return and a supply filter, they are quite large and I cant...
  18. O

    Just bought a Kubota KX91-3 and I have some ????

    Ya I checked the play today and it seems to be only in the boom bushings, Whew!!!!
  19. O

    Just bought a Kubota KX91-3 and I have some ????

    Oh so a turn table bearing is bad?? seems any repairs on these are bad though
  20. O

    Just bought a Kubota KX91-3 and I have some ????

    Hi Guys Well I just picked up a KX91-3 at an auction, its a 2004 model. I have a couple of questions: one of the tracks is finished and needs to be replaced, where is a good place to get those? The machine runs very well and seems nice and tight, no leaks etc. but there is and I'm not sure if...
Top