• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    wirtgen w2000

    Hey guys I’m at a loss right now. I’m working on this machine and they want me to change the bearings at the bottom of the conveyor belt. I can access 3 of the 4 bolts on the block but the forth is directly behind the mount for the front of the drum on the arm that goes up and down. How on earth...
  2. A

    Wirtgen w2000

    Hey guys I’m at a loss right now. I’m working on this machine and they want me to change the bearings at the bottom of the conveyor belt. I can access 3 of the 4 bolts on the block but the forth is directly behind the mount for the front of the drum on the arm that goes up and down. How on earth...
  3. A

    Hitatchi

    Hey guys there’s two bolts on the hydraulic return filter plate that are stripped. 6 of the 8 are good and today it started spilling out the side. What’s the easiest way to fix this
  4. A

    318 g john deere skid wont lift bucket fast

    hey guys im back again. Ive been working on a skidsteer. when it first came in it would raise and lower the bucket just fine but you could not turn in it. So we decided to replace both drive motors and the hydraulic pump. now we can turn and move just fine but when you go to raise the bucket...
  5. A

    w 220 mill

    So we have a mill that raises the hood just fine but when you go to put it down it still tries to raise. we have replaced the switch, checked the selonoids that are associated with the hood raising and cant find anything. one thing thats weird and that stands out is there is a red wire connected...
  6. A

    Fl60 water truck

    Hey guys I’m wondering where I go to look for torque specs on the rear hubs for after I replace the hub seal
  7. A

    How does a rollers joystick work

    What piece of it releases when you push in the button to go forward and reverse
  8. A

    850k lt jd dozer

    Hey guys I’m back. So my dozer was working fine until it all of a sudden stopped. I have a code 3251.7 that pops up but would that make the whole machine unresponsive? The light is flashing. Charger pressure low and dpf pressure errors are the other codes. 522444.1. I’m not sure where to go with...
  9. A

    246d3

    Ok now I have a sepperate issue aside from the scv. It is now throwing a 3700-3 loader bucket inclinometer sensor. What could that possibly be? I’m guessing it’s the sensor that tells you your bucket is in the air but I’m not sure where it’s at.
  10. A

    246d3 wheel cat skidsteer

    1374-4 engine fuel pump pressurizing assembly #1 voltage below normal In short we have replaced the fuel pump and fuel pressure sensor to try to fix this issue. We tested the plug to the pump and it shows 1 ohm and reads 12v. I don’t think it’s the harness but what else could it be?
  11. A

    85 g John Deere excavator regen

    So I’m trying to do a force regen on my excavator and I’m getting nothing. There’s a red light lit inside the switch but when I press and hold it it’s not going in to regen mode. It’s at a low idle and the hydraulics are off. What could cause it not to go in to regen mode? Tia
  12. A

    Komatsu 138us lc pc keeps shutting off

    So I just installed a new ignition in it because when I would wiggle the wires it would turn on. Now I’m getting a dw45ka e03 code and it doesn’t make sense. Google says it’s a swing code but why would that shut off my machine. Any advice would help
  13. A

    Sd77da Volvo roller

    What else could cause my e brake to activate when in motion in forward or reverse? Also it seems like the high and low gear isn’t functioning like it’s always in high gear. I’ve replaced the hydraulic pump and the manifold for the e brake and high gear.
  14. A

    Ir roller 70

    I put a new battery in it, tested fuses, swapped relays, bounced on the seat, held the key in the start position and moved the shifter forward and backwards, tested the battery kill switch, tested battery, tested power to starter, jumped starter and it works and I can’t get it to even try to...
  15. A

    SD77DA Volvo roller

    Vce00s77a00201015 is the vin number. I am having issues with it and can’t figure out what’s wrong. It would randomly jerk you and not go forward so last time we change out the pump that’s connected to the block and it worked fine after that. Now I just replaced it again but this time it lets you...
  16. A

    320g John Deere skid quick attatch

    This skid has an electronic quick attatch connected to it. I’ve replaced wiring harnesses, the quick attatch itself. It keeps blowing the fuse though. It’s connected to the blower motor as well and I can’t seem to find any breaks in wires or issues that I can see. Any suggestions would greatly...
  17. A

    279d cat skid

    What would cause my skid to not have any functions on the right joy stick
  18. A

    DPF FILTER?

    Im working on a 336e cat track hoe and a code is being thrown for a dpf filter. i cant locate or find where this filter is.. is it possible it dont have one? MYE06497 is the serial number for my machine. its also reading a high coolant temp. i dont know if im looking in the right places or not...
  19. A

    315f l

    SO i just did a service on this trackhoe and one of the guys i work with didnt let the fuel prime before starting it and now it wont start. any suggestions on how to fix this issue? ive tried cycling the key several times and let it crank for a few seconds and im not getting anywhere.
  20. A

    d6n xl

    OK so I know I've posted a lot on this site referring to this specific dozer. I'm pretty much brand new to the heavy equipment side and I'm always looking for new ideas on how to trouble shoot something. with this power loss on our dozer do you think it could be a tensioner and possibly fan belt...
Top