• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

3cx

  1. T

    JCB 3CX powershift 2001 stopped dead won’t turn over

    Hey there, working with my old man’s 2001 JCB 3cx powershift, I was a good half an hour into moving a heap of topsoil when before I was about to plunge in for another bucket (bottom of the bucket hadn’t even touched the floor) it stalled on me, turned the ignition, it turned over, started up...
  2. H

    2014 JCB 3CX Fuel Issues, not starting without starting fluid.

    I have a 2014 Jcb 3cx that's starting to give some random issues. first, it was return line restrictions,( fixed by replacing the injector return lines). Next, it started having problems starting, I would prime the lift pump by turning the ignition on and off about 3 times to make it run. third...
  3. P

    2017 jcb 4cx ecu location

    Hey everyone anyone know where my ecu is located on my machine and how to get to it. 2017 jcb 4cx backhoe?
  4. B

    JCB 3CX Engine block heater location/install?

    First time poster, near-term reader - lots of good info here that helped me find my backhoe.... I picked up a previous-life-Sunbelt JCB 3CX (2016) that lived in Florida. T4 engine - per JCB site its - "JCB 4 Cyl Elec Engine (UN3/GB3, T4i, T4F, CEV Stage-IV <55kw)" Now that its 2 miles above...
  5. casey518

    JCB 3CX (1400B) Losing hydraulic pressure at operating temperature.

    My 1986 JCB loses hydraulic pressure as the fluid reaches warmer temperatures. I am running new ISO 46. The machine has a gear pump and a relief valve that controls the loader and hoe pressure independently. When I first start the machine all functions meet spec pressure (about 3000psi on...
  6. casey518

    JCB 3CX (1400B) Titan Thumb Install

    So I ordered a 36" Titan thumb to mount to my JCB. The thumb seems very heavily built for one that is cheaper than dirt (literally cheaper than a load of dirt). JCB's extra dig design however poses a few installation challenges. I guess I have a few options. The first is to weld the thumb...
  7. B

    Sage advice needed re JCB backhoe and the dealer support

    Need advice here, i bought a 2012 JCB 3CX with 2300hrs backhoe over two years ago from big brand rental auction, the machine has worked well and hard. Lost 2nd gear fwd a while back from too much abuse uphill underload, so eventually decided to pull the box, rebuild it and refit it, but I did...
  8. T

    JCB 3CX 1989 breaker lines Help

    Hello everyone, I have a JCB 3CX 1989 non-turbo backhoe, version without telescopic rear arm. I want to put a hammer breaker onto my machine. My JCB doesn't have any factory breaker lines installed, and it never had. I have bought used original hydraulic breaker line kit, and I want your...
  9. T

    JCB Maximum Net Horsepower

    Does anyone know where I could find the maximum net horsepower (certified to SAE Method J1349 or ISO Method 9249) for a 2013 JCB 3CX?
  10. B

    JCB 3xc torque settings for engine

    hello im rebuilding engine on jcb 3cx backhoe, it has JCB brand engine and i can't find torque settings for it anywhere. would anyone happen to have this? serial# for machine is 2006202, engine serial is sd320/40347u0501811.
Top