• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

backhoe

  1. E

    Backhoe elevation issues?

    I recently purchased a 78 case 580c backhoe loader. The previous owner had it parked for a couple years before I bought it. It seemed to run strong there, but when I got it home it bogs down under load. I'm wondering if the elevation change would make a difference. He lived at around 1,000 ft...
  2. J

    Cat 416c losing drive shortly after driving.

    Hi everyone! Im new to the forum, but i have frequented it a bit over the years. So heres my deal. Ive got a cat 416c (4zn1-up) i got in a non running condition from my in-laws a few weeks ago. It sat for 10 years, but i did start it up 6 years ago but immediately shut it off as the stabalizers...
  3. N

    2001 Terex 860 Boom not lowering

    Hello all, I just purchased this machine and the boom will go down a little but i will do so very, very slow to the point that it will just stop. Ive checked and i have no leaks. I purchased it from a car dealership they were the first owners and in the last 25years of this machines life they...
  4. JohnDeere310D

    310D loader control not working

    So today I was moving snow with the 310D and I felt the loader control turn about an inch clockwise away from me. The loader still works, but now the dumping position barely moves the bucket. Any ideas as to what’s wrong? Common problem?
  5. J

    580c case and 580d case swing tower swap

    Hello yaw!! I’m trying get out from underwater on this here 580ck 1977 model backhoe. I’m new to this forum and would like some input. The swing tower and main boom bushings are the most worn I’ve ever seen. I can get a 580d swing tower in excellent shape. However I can not find any info on if...
  6. E

    CAT 420 Fuel system issues (Gas in fuel tank)

    Good morning, I'm in an interesting situation with a 420 backhoe, a few days ago this machine arrived and one of the yard guys said it ran 'funny'. I went to go drive it and found a number of issues with it. For one, the serpentine belt had ripped and was laying on the ground next to the...
  7. K

    1997 John Deere 310se

    Hi all, Recently I’ve discovered excess fluid in the rear differential of my 310se - appears to be leaking from the transmission to the diff. Any ideas on what seal this might be and how feasible it is to fix? Thanks in advance
  8. F

    JCB 214e series 2 Backhoe- Need relay/fuse help

    Hi, does anyone on here have a photo of a JCB 214e side relay box in correct working order? My dad and I picked up an old 214e from the late 90’s thru early 2000’s and the side relay/fuse box was disorganized as heck. I’ve read the manual but I can’t seem to find a simple layout of which color...
  9. S

    2004 Volvo BL 70 Backhoe electrical diagrams

    hello fellow members I'm trying to get the electrical diagrams for my backhoe. I'm trying to get the alternator charging without jumping it,so any diagrams for that circuit would be greatly appreciated thanks Joe
  10. D

    Deere 410E Hydraulic Problem

    I have a 1998 John Deere 410E ext Hoe with 3800 hours,No ride control,very clean and well serviced sense new. Machine was very strong and dependable. Within a few hours hydraulics became very slow and weak, now it effects everything, steering, hoe loader, out riggers won’t pick up the machine...
  11. O

    John Deere 310sg

    Customer has a JD 310sg back hoe that needs MFWD output shaft replaced. It Threw fwd driveshaft and twisted shaft. See pictures Im Looking for information as far as removal of transmission and overhauling transmission before I get started. Will be assessing bearings, seals, shafts, etc. Where...
  12. R

    2016 310SL Remove hydraulic manifold

    Hey guys, the pump blew glitter in our system and seized the priority valve in our Deere. The boss wants us to remove the entire manifold to send our for repair and to have resealed now and to flush the system. I see no way to get clearance to remove it without taking it apart valve by valve...
  13. digger e

    1983 Case 580SE Right Stabilizer Raises VERY Slowly

    Hi all, Looking to repair the right stabilizer on my Case 1983 580SE. The stabilizer goes down no problem, and has plenty of power to lift the machine. Raising the stabilizer however requires holding another lever (I usually pull dipper lever back a bit) then raising the right stabilizer does...
  14. D

    Foaming fluid

    Hi, I hope my message finds everyone happy and healthy! I have a 95 John Deere 310D backhoe (T0310DDG814698). I was having reverser issues so I pulled it and had a local company do a rebuilt. I reinstalled it and ever since the reverser foams the hydraulic fluid and when I turn the machine off...
  15. H

    2014 JCB 3CX Fuel Issues, not starting without starting fluid.

    I have a 2014 Jcb 3cx that's starting to give some random issues. first, it was return line restrictions,( fixed by replacing the injector return lines). Next, it started having problems starting, I would prime the lift pump by turning the ignition on and off about 3 times to make it run. third...
  16. T

    Case 580N (2012) bogging on elevation

    Main fault code I’m getting (3218) -general short circuit on electric cable…occurrence-250 times Two new recent fault code(past couple hours) 4214 & 4212 1,2,3,4 gears sensor input voltage too high For the past six months sometimes backhoe would bog down upon elevation. I would turn it off...
  17. D

    Case 680K Sudden loss of all Hydraulics

    Hey there everyone. Long time reader First time poster. I've recently ran into an issue that has me stumped. I've got a mid 80s Case 680K construction King. Bought it about a year ago and it's been a good worker. I've been slowly updating things here and there to make her a nice machine. On...
  18. J

    2005 John Deere 310G, 2nd gear not operating well.

    I went to use our Deere 310G for the first time in a couple of months, and I've noticed an issue with second gear. It engages, but only works at about 25% power before it dies off. The pedal seems to function properly. First, third, fourth, and reverse gears are all working fine. I don't hear...
  19. R

    2016 310sl no power steering

    I have a 310sl with no power steering at all! If I lift tires off the ground I can turn the wheels and all other functions work but the power steering. If I crank it to the side I have no whining noise like there isn’t pressure. I’m unfamiliar with these systems as I am a truck mechanic lol any...
  20. S

    Case 580B minimal/no reverse

    I'm looking to buy a 73 case 580BCK but am hesitant because reverse isn't working. I've read through a bunch of forums so far and haven't come across the exact issue that I'm seeing. The clutch pressure line to the gage seems to be leaking and the power shuttle control spool doesn't seem to be...
Top