• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

electrical issues

  1. C

    IT28G Slow lowering hydraulics and cannot use joystick to lower mast

    Hello, i have an 03 IT28G with forks installed. The main lift cylinders will not lower unless manually powered (with a battery) at the solenoid on the manifold that is at the base of the cylinders. you only need to activate the right side for it to work because the left will do nothing. I have...
  2. S

    Takeuchi TL 150/ CLT 80 Heater Air/ Glow Plug Issues

    I have a Gehl CTL 80 that was having electrical issues so I bypassed all the electronics and made a manual fuel stop solenoid that I can kill the machine with. Since this happened, I am having issues with starting my machine, however if I give it a shot of starting fluid and it will start right...
  3. B

    Volvo ec210blc troubleshooting.

    Hey fellas, new on this forum as of today. Hoping to find some much needed information as I am working in a remote environment and do not have convenient access to a dealer or HD mechanic....as many paid trips I can avoid, the better. We’re currently developing our property up in Bamfield BC...
  4. Bobcat Crazy

    Bobcat 763 Electrical, Gauges come on 1 second, Then says Input

    I have most of this 763 back together. I am now trying to crank it but, when I turn the key on the gauges and panel lights come on for one second, then everything goes off and the (Input) light comes on for about 5 seconds and then nothing else works. I can then cycle the key again and it...
Top