• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

hydraulic issue

  1. D

    Pc160lc-7eo hydraulic driven magnet

    Hi guys. Thanks for allowing me into the group. I have a pc160 2008 yr with 8200 ish hrs. I had a hydraulic driven magnet for ir but upgraded to a bigger on. The new one runs at 26 gallons per minute. The manufacturer suggests that I run it in breaker mode so I don't have high return line...
  2. C

    IT28G Slow lowering hydraulics and cannot use joystick to lower mast

    Hello, i have an 03 IT28G with forks installed. The main lift cylinders will not lower unless manually powered (with a battery) at the solenoid on the manifold that is at the base of the cylinders. you only need to activate the right side for it to work because the left will do nothing. I have...
    • Cadwell
    • Thread
    • cat electrical issues help needed hydraulic issue it28g
    • Replies: 11
    • Forum: Tool Carriers
  3. joshbowling45

    CAT 953 Trackloader slowing down after warming up

    I've got a late 80s 953 track loader that I've been doing general land clearing work with. I've been noticing that after the machine gets up to operating temps, the hydrostatic drive slows way down. Loader hydraulics are still running good, just gets to the point that the trackloader is barely...
Top