• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

roller

  1. A

    Xcmg xs120 roller

    Can anyone give me the part numbers for centre pivot pin and bushings for the pivot joint at the centre of this machine? Serial # 20060054
    • Aaron.ampcon
    • Thread
    • bushing bushing replacement compactor pin pin and bushing turning roller xcmg
    • Replies: 0
    • Forum: Rollers
  2. A

    Case sv216 roller no start issue

    Got a case sv216 roller with common rail cummins engines, crank no start issue, what should I check for?
  3. Jenson48

    JCB VM117 Roller

    Vibrator drum not working. Fuses all good. Needing wiring schematics for the vibratory system. And also a code showing P2135-00 and throttle response was none. Cut it off and it throttled back up fine then showed again. Thank you in advance. Attached are pictures for serial number.
    • Jenson48
    • Thread
    • jcb roller vibration vm117
    • Replies: 2
    • Forum: Rollers
  4. Lance Zhang

    Have you heard of the Chinese road roller brand Benma?

    There are many road roller brands in the world, and many of them originate from China, such as Shantui, Sany, and XCMG. It's understandable if you're not familiar with BENMA road rollers, as most people recognize us by our other name, Storike. Our road rollers have been sold to all continents...
    • Lance Zhang
    • Thread
    • road building roadroller roller
    • Replies: 1
    • Forum: Rollers
  5. M

    Relay issues

    Hi there, question for yall. I have a 2012 Ammann av26-16 2k with a vibrator issue. The vibe kicks on when you hit the switch but wont turn off unless you turn off the machine. Ive ordered a new relay but realised after taking them apart that they are two different relays. Now P.S once in a...
  6. D

    Ammann CS150

    Anyone have any experience with the Ammann CS150? Looking at adding a 2013 model to fleet. Keen on owner feedback, drawbacks and comparisons of the Ammann brand
    • DHNU86
    • Thread
    • ammann compaction roller smooth drum
    • Replies: 0
    • Forum: Rollers
  7. Seans problems

    Does anyone have a manual for CS56 roller?

    Hi Everyone, Do any of you have a parts/service manual for a 2008 CS56 vibratory roller? Serial number is : CAT0CS56J-FCS00112 Thank you in advance.
  8. Girth_Brooks

    Cat CB24B low oil pressure

    S/n: CATCB24BE42000261 I have put a mechanical guage in where the oil pressure is read and nothing. It will only run for maybe 30 seconds. But the engine sounds completely fine and no blowby really at all. It has 3,000hrs maybe a hair more. I was wondering if there were any like relief valves or...
  9. B

    Bomag BW211D-3

    I'm new here so I'm not sure if this is the right area to post this. We have a BW211D-3 that has very stiff steering and also sometimes won't travel in either direction. It will start forward a couple feet then stop, then it can go in reverse a few feet. I checked the pressure at the steering...
    • BobH52
    • Thread
    • bomag hydraulic problem roller
    • Replies: 14
    • Forum: Rollers
  10. F

    Bomag BW120 AD when reversing slowly the brake has been initiating fighting the drive motor

    We recently acquired a Bomag BW120 roller with 1000 hours on the clock. When reversing really slowly we were finding at times the brake was initiating whilst the roller was still in drive. It was quite abrupt and from what i have read can lead to quite extensive hydraulic motor damage. The...
    • Farmingosteo
    • Thread
    • bomag bomag bw120 brake bw120 bw120 ad bw120ad reverse roller
    • Replies: 1
    • Forum: Rollers
  11. A

    Caterpillar CS-533E hydraulic system

    Hello. I have a problem in my Caterpillar CS533E. It shows this indicator with alarm. I have changed the hydraulic filter, but the the fault still exists. Thank you in advance.
  12. M

    newbie , where could i start?

    Gday mates, ive been on the building game for 5 years, working as a scaffolder atm but the sore back is takin its toll, i tried to get dogman ticket and start working with cranes, but really i just had few jobs here and there, it can be very hard to get a job as a green guy and have to lie that...
  13. J

    Essick VR30RE with Wisconsin AENLD

    Hi everyone, picked up an old Essick vibratory roller over the weekend, model number VR30RE, and I'd like to do as complete of a service on the unit as possible before I put it to work this summer doing some driveway surfacing at the farm. The roller is in relatively good shape for its probable...
    • JHead
    • Thread
    • essick packer paving roller tamper vibratory wisconsin
    • Replies: 0
    • Forum: Rollers
  14. H

    Stone Wolfpack 3100 (Starts but does not move)

    Hey guys, I have a Wolfpack 3100 with a movement issue. Problem first showed up at job site. Was working fine but randomly stopped moving. Managed to get it moving after a few minutes, but once I got home the problem showed up again. Any ideas? Thanks!
  15. H

    Ingersoll-Rand DX500E Parts

    Does anyone know where I can source new or used parts and illustrated parts breakdown for an Ingersoll-Rand DX500E Walk Behind Vibrating Roller? Like this one: http://www.trenchersplus.com/brochur...behind_lit.pdf Specifically I need the pulley assembly that comes off the hydro pump for the...
    • helmdog25
    • Thread
    • dx500e ingersoll-rand roller walk-behind
    • Replies: 1
    • Forum: Rollers
  16. J

    Bomag BW172D

    Looking for a rear axle assembly on a Bomag Bw172D... Anyone know where to find one? I've called several scrap yards and can't seem to find one.
    • JakeDearing
    • Thread
    • 172 axle bomag bomag172 bw172 bw172d roller
    • Replies: 0
    • Forum: Rollers
  17. J

    CASE PADFOOT ROLLER HELP

    I've got a Case pad foot roller and the serial number tag under the steps has been broken off and missing. I am wondering if anyone knows any other way to identify the machine to get the original serial number.
    • JakeDearing
    • Thread
    • case help padfoot roller serial number sheepfoot
    • Replies: 0
    • Forum: Rollers
  18. J

    Case Padfoot Roller Help

    I've got a Case pad foot roller and the serial number tag under the steps has been broken off and missing. I am wondering if anyone knows any other way to identify the machine to get the original serial number.
Top