• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

telehandler

  1. B

    jlgskytrack 5028 , please help .Need to find a way to reroute fork tilt lines. original desing is so bad.

    please help 5028 skytrack telehandler forktilt hydraulic lines running thru boom constantly geting ripped up in guide track or on piston. i know im not the only one. has anyone been succesful with making your desing,modification for underneath outside boom?pully or sspring? anything ?
    • brkmke
    • Thread
    • 5028 skytrack hydraulic hoses in telescope keep getting destroye telehandler
    • Replies: 4
    • Forum: Forklifts/Telehandlers
  2. A

    JLG telehandler no start issue

    Got a JLG with a cummins QSB4.5 engine, so the engine radiator was pressure washed, machine started and moved a short distance and shut off, started back after trying for some time would idle then shut off under load, now it doesn't start at all. Active codes for all injector drivers and intake...
  3. C

    Ingersol Rand vr642 wiring schematic!

    Hi there! I’m looking for a wiring schematic for an Ingersol Rand vr642B. Had the engine harness melt together and they had some custom wiring done (cause of the fire) and I’m trying to attempt to fix the damaged section where the fuel shutoff tees into the harness but I can’t find a schematic...
  4. G

    Gehl DL6L shift issues

    I have a gehl dl6l-42 that started not shifting into 3rd and 4th gears. I can switch between 1 and 2 and works fine but when I shift up to 3 the transmission does not shift. The electric monitor displays the correct gear that shifter is in.
  5. S

    Lull 644d-34

    Please help!, I recently purchased a lull 644d-34 and the automatic fork leveling does not work at all, I wanted to know if you know what this might be, some possible fixes thank you in advance
  6. M

    SkyTrak 8042 - Torsion dampener coupler

    Hi - First time post! I have a line on a 1995 SkyTrak 8042 for a decent price ($5K). S/N 0740 The main input drive shaft is out of the machine (see pics). From what I can tell, it needs a torsion dampener coupler, i believe part number 7150523. I can’t seem to find any used, and the only new...
  7. D

    Fendt T955 telehandler update?

    Does anyone have an update on the Fendt T955 or Sennebogen 355E telehandler? I'm trying to pick it or a Manitou 961 on the farm.
  8. M

    lull 644b-37 steering locked

    I lent machine out to someone and while using the wheels just locked to the right . steering wheel will turn to right but wont turn left. hydraulic pump doesnt seems to want to engage when trying to turn steering wheel to the left i switched the right and left hoses at the orbital but its...
  9. A

    Connecting cat ET to TL1055

    Hello I am unable to connect ET to a cat TL1055 telehandler engine which is a c4.4. There is power to the communication adapter because the power light lights up but a error comes up on ET saying it is unable to connect, I have also tried it on a TL1055C machine and it does not connect to it's...
  10. D

    Replacing boom hydraulics in 934d-9 gradall?

    Hello Everyone, I own a 1999 Gradall 934D-9. The hydraulic lines are leaking inside the boom. Could someone give me some advice on how to access them? Any help would be very appreciated. Thank you very much, Dexter
  11. T

    Lull 1044C Series II hydraulics surging/pulsing

    Hello everyone, I have a customer with a 1998 Lull 1044C Series II telehandler. Customer complained of a "Surging" sound every couple seconds when the machine is at idle. When the machine starts up the hydraulic low oil pressure alarm sounds for a couple seconds and then the machine has full...
  12. D

    644 tt 34 Lull boom cylinder

    Hi all, new to this site, looks to be an awesome place! I am in the process of buying a 644 tt 34 Lull that has a leaking boom cylinder. I have rebuilt cylinders before just nothing of this length (it's about 10' long) It appears as though the cyl has to come out the rear of the boom and I've...
Top