• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

throttle control

  1. S

    690 ELC throtle actuator bypass with a manual throtle cable

    The throtle actuator on my excavator quit working. The James River machanic told me to bypass it with a simple throtle cable. This would bypass all exectronics. Make my excavaor throtle all manual. This excavator has a mechanical fuel pump. Does anyone know if the electronic throtle actuator...
  2. T

    Dual Engines, One Throttle

    Does anyone have experience with any dual engine setups that run the throttles electrically on old diesel without ecm's? I was talking to a guy that use to have two 500 case tractors that someone mated together to make one bigger tractor. He said both the engines had an electric actuator on the...
  3. R

    Samsung 210LC 1998 model or MX225LS , throttle and fuel shut off issues FCY0597

    Hello All, I searched and didn't find out what I was looking for. He gave me 2 different models so I am not sure which it is.I am good at troubleshooting equipment but I am helping a buddy out and he is 12 hrs from me. The machine lost throttle control. they bought a new throttle control dial...
  4. P

    Case 580c throttle lever not staying set

    I have a Case 580c backhoe. I replaced the brake master cylinders, which required the removal of the dash console that required removal of the shuttle and throttle levers/assmbly. After reassembling the console and shuttle/throttle levers and beginning to test my brakes, I noticed that the...
  5. S

    Case TR310 no throttle response

    Case TR310 Believe it's a 2016 year S/n; NGM415547 No throttle response, will only idle. No codes that I can find? Not 100% how to pull the codes on this screen. All the fuses are good, no hot relays, swapped around relays just to be sure, nothing corroded in fuse/relay box. Power going to...
Top