‘95 Cat307 graymarket track adjuster

[Newguy 747]

Hi everyone, left track adjuster keeps getting loose. Does anyone have a procedure or shortcut they could share to efficiently remove the adjuster.?
Do I need to remove track or can the job be accomplished with the track in place?
Newbie here appreciate all the help I been given from this website
Thanks

 

[Mechanic_Caterpillar]

Hello.
Please write the serial number of the excavator.

 

[Newguy 747]

Ok
9ZL02090
00B80662
Thanks for responding!!

 

[Mechanic_Caterpillar]

Your Japanese market excavator 9ZL02090 is equivalent to excavator 307_2PM1-256, so the instructions from 2PM apply.
You do not need to remove the track, you need to remove the track roller under the tensioner. See the manual attached.

 

[Mechanic_Caterpillar]

Addition

 

[Newguy 747]

OK, great I’ll check it out. Can’t tell you how much I appreciate this information. This website is great!

 

[Tyler d4c]

If its anything like the 307ssr 2 bolts it falls out the bottum. We had to make new barrels for ours as the hole was not straight or round