I was mowing with my skid steer today. It ran great and everything went as planned. After I was done and it sat for a number of hours I needed to move the machine. It started just fine but when I turned on the light switch it died. Now when I turn the key I have no power to anything. The dash cluster doesn’t light up or anything. I hope it’s something simple but am not 100% sure where to start. Any ideas?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
09 279c electrical issues.
- Thread starter M_Sweeney
- Start date
Nige
Senior Member
A good start would be a Serial Number. I imagine it will be either MBT or KWB-something.
The S/N gets you an electrical schematic appropriate to the machine that will enable you to start tracing power/grounds.
Have you checked the tightness of the battery cable connections.?
Do you have a multimeter.?
Have you looked at any of the fuses yet.?
The S/N gets you an electrical schematic appropriate to the machine that will enable you to start tracing power/grounds.
Have you checked the tightness of the battery cable connections.?
Do you have a multimeter.?
Have you looked at any of the fuses yet.?