jashford1
Member
Hello all, I apologize up front for the lengthy post, wanting to provide everything I can. I’ve read through many threads on this subject and am now somewhat confused. I have a 2015 299D2XHP S/N: DX200203 that will not crank. I am an individual cleaning up my place, not a business. Everything was working great, I was mulching with a J-D MH60D head when I developed a hydraulic leak on a Flat Face coupler. I unhooked the mulching head and pulled the machine in my shop to repair or replace the coupler. I got that fixed and noticed the wires going to the bucket angle sensor were in bad shape. I cleaned that up, fixed the wires, etc. the attachment locks were sticking so I cleaned them up, oiled everything good. During all of that I had it on & off, started multiple times. I went out yesterday to crank it up to back it out, nothing. The back power disconnect switch works, when off no power anywhere. With the power disconnect on, the in cab key in the first position I hear the fuel pump or glow plug (whatever it is) buzzing. Checked the safety switch and it appears to be operating (raise and lower the left arm rest the seatbelt light off & on, also with the armrest down if I raise out of the seat the light comes on). Unfortunately my shop ceiling is not high enough to raise the cab to check the external fuses, I check all of the in cab fuses, all are good. I have no active codes, I am attaching my notes I made before forgetting and the log, along with a shot of the display. My gut tells me it is something simple since it was starting and stopping without me moving it multiple times since pulling it in. Thanks all.