goldhunter_2
Active Member
ok same 503L galion grader , the front spindle basically has one bolt that holds the outer bear and washer (thus the wheel) onto the spindle . this bolt keeps back out maybe a hour of use or a week of use then wheel falls off as I drive I have tried wire tie the bolt but snapped the aircraft wire yesterday after about 100 feet , I put it back together again (3rd time that day) just to try to get out of road and back home it went a few more feet and the grade 8 bolt snapped this time .
am I missing some type of part that holds that wheel on and putting to much pressure on that bolt ? anyone have the parts drawing for the front left spindle to see if I am missing a something seems there should be more then one bolt holding that tilt wheel
am I missing some type of part that holds that wheel on and putting to much pressure on that bolt ? anyone have the parts drawing for the front left spindle to see if I am missing a something seems there should be more then one bolt holding that tilt wheel