Watglen,
in your post from Friday 2:01 PM transmission is in 4th, but engine rpm only 1655. This is far too low, should be close to 2200 rpm then. Even in stall condition engine got 2100 rpm.
My assumption:
There is an engine speed limitation set somewhere to avoid too high travelling speed.
Sorry, i missed your reply. I wanted to clear that up.
In that pic i was focused on what the display showed for available gears.
I have 4 distinct gears. There are 3 distinct gear changes.
Warmed up, the machine does 15mp at 2200 rpm, flat pavement.
Stall test: 3rd gear wide open, brakes applied, gives a stall rpm of 2100.
lock up button does nothing....option not installed.
I was hoping for some sort of setting that limits speed, but so far no-one has pointed to that.
Thanks for your help
Ken