powerjoke
Senior Member
- Joined
- Aug 2, 2009
- Messages
- 1,125
- Location
- Missouri
- Occupation
- owner/operator/estimator/mechanic/grunt/ditchdigge
One of the old 2DS machines is acting stupid and I need a little input.
It will not travel at full speed, it just comes to an abrupt stop after about 5 feet!
so basically here it is, while in programming mode "-5-" I can view the numerical values of the F-N-R switch, and just as soon u pull it in "6" in turttle or "5" in rabbit the machine stops moving. -----this happens while going forward only----- Reverse operates as it should.
it pops up a 103.7 and a 104.7 (079) and is a right forward solonoid and a left forward solonoid......So, when i reverse the solonoids (forward to reverse etc.) the problem then moves to the reverse side of the F-N-R switch (but the tracks are still moving forward)..
with all of that being said, I had a old 2NZ (or 2ZN, i forget) 953C that did the same thing but it was only once in a while and so we never worried about it,.....
ANY IDEAS?
oh BTW; the CaT truck was here for 4hrs yesterday and he told me to change the charge filter .
Pj
It will not travel at full speed, it just comes to an abrupt stop after about 5 feet!
so basically here it is, while in programming mode "-5-" I can view the numerical values of the F-N-R switch, and just as soon u pull it in "6" in turttle or "5" in rabbit the machine stops moving. -----this happens while going forward only----- Reverse operates as it should.
it pops up a 103.7 and a 104.7 (079) and is a right forward solonoid and a left forward solonoid......So, when i reverse the solonoids (forward to reverse etc.) the problem then moves to the reverse side of the F-N-R switch (but the tracks are still moving forward)..
with all of that being said, I had a old 2NZ (or 2ZN, i forget) 953C that did the same thing but it was only once in a while and so we never worried about it,.....
ANY IDEAS?
oh BTW; the CaT truck was here for 4hrs yesterday and he told me to change the charge filter .
Pj