Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page.
We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy.
Thank you!
Have a volvo A25C. Truck will not select any gears forward or reverse, and the alarm buzzer sounds when you try and select a gear. Contronic display unit also not working so am unable to retrieve a code
Cheers
Hmm, could be a few things. I would check and make sure that you are building full air pressure on your brake system prior to putting in gear. Another thing to check would be the rpm range when attempting to put it in gear. If you are over 900rpm it won't go into gear.
I am wondering if it is linked to the display unit not having any power, because I also found that the ECU2 which provides information to the display also has no power.
Transmission ecu has 24v supply in pins 2, 20, 16 and 17, and the gear selector has power going in and out
Picked up a 1997 A25C SN 5350V9574 at auction and it seems to have the typical age related issues. Just got it to my yard today, drove it around for a bit, and it upshifts/down shifts through forward gears but when backing up if you are fwd-reversing a couple times eventually it will not engage...
Started on the trans replacement on my A25 this weekend. Bit of work for certain. Some takeaways for those who have not done this: - Fuel lines on my truck were similar to airbrake hose from the tank and then to a adapter fitting to some type of metric flare. I had problems finding plugs so...