When the transmission pan is full, i can start the loader, and the loader does not want to move. It starts cavitation, i shut it off, get off the machine and check the fluids, and the pan is completely empty. 10 minutes later, the pan fills back up with fluids that is white and foamy. I changed the tranny filter, and the filter was completely dry and empty. Can someone answer this as to why it is happening?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Early 90s 544E loader transmission problem.
- Thread starter Bryan49
- Start date
mg2361
Senior Member
Welcome to HEF Bryan
!
First check your transmission's breather.
If it is clear then it still sounds like you need to add oil. The oil level is supposed to be checked with the engine running and the transmission at operating temperature.
!First check your transmission's breather.
If it is clear then it still sounds like you need to add oil. The oil level is supposed to be checked with the engine running and the transmission at operating temperature.