Knuckleduster
Well-Known Member
So the transfers or doors on the machine are wrong--they are from a ZX160 LC. No wonder the manual I have is wrong. I take it there is no onboard diagnostic as with the Zaxis machines. Thanks Dave in identifying the beast. Had the covers off the ecu compartment behind seat and checked for busted leads etc and foind a 4 pin port for diag software and a learning switch with a cover over it to stop accidental use.Will need to get trawling around for the correct manual. EX and Zx machines are a different beast. I`m still mistified about these "extra" relays I have found today--one def needs replacing as its about as much good as a teapot in a chocolate factory. Getting a pair on order from Amazon and should be delivered in 24 hours