Welcome!!!

[Homerun]

Homerun

Hello everyone, I am omran from Bgdad KY the finish grading guy, every one call me homerun, and I am a small buciness owner, who takes on projects which can be delivered in a proffisonal way, I do errosion control, grading, general bobcat work and Landscaping. I still need to learn alot since I startedthe whole thing as a hobby in 2004 LOL. but I listen to every one and try to take what makes sense to me.

 

[Homerun]

I would like to get your input on this:
what do you guys think about the aftermarket idlers for bobcat t250 and such?

 

[stock]

Welcome there Homerun you anywhere close to the old buzzard/ blue throated warbler Atco?

 

[CalChando]

hey guys, thanks for havin me. im 21 years old, go to school part time, and work the other part of the time for my families construction company. i have a collection of about 100+ scale models and i also race open wheel modifieds, so i have my plate full i guess. anymore questions ask, ill be postin pics of my collection, that and im getting ready to sell them soon, so if anyone is interested in those there's a lot of trucks, offroad, loaders, mix of models from early 80s til about 2000.

 

[AZRentals]

AZRentals

Hello All
I am a supplier of primarily Caterpillar Heavy Equipment Rentals for the SW USA. We have Branches in Arizona, California, Nevada and Utah with some other satellite operations as far north as Edmonton Canada. We offer Bare Rentals as well as Operated Rentals. We also offer well maintained used equipment for sale in the USA and Abroad. We have been in business since 1962 and are very well established. I look forward to making some new friends here and sharing some stories with you all.

 

[AmerIndependent]

Welcome to the forums buddy!

 

[stock]

Welcome there AZ not too sure about the advert though..... might have a look at the site legislation.

 

[AZRentals]

It wasn't meant to be an advert. More of an intro. Just explianing who I am, but thanks for the tip and the warm welcome.

 

[AmerIndependent]

You're fine AZ, you're allowed one brief description of your company. I pulled from the "Rules" section at the top:

"A vendor of goods or services may start one introductory thread explaining their product or service and may answer questions about such within that thread. No further promotion of your product or service may be made without sponsorship."​

On edit: A second reading of it shows you may start a thread... whoops. I think Steve will let you slide.

 

[AZRentals]

Welcome to the forums buddy!

Thanks. I actually found this forum as I was searching for other info on a D6R XL for some Transmission info.

 

[AmerIndependent]

You've come to the right place. There's a wealth of information here. Did you find what you were looking for?

We've been building transmissions for your company for the last two decades so I hope you aren't having trouble with one of ours...

 

[willie59]

Welcome to the forum AZRentals. :usa

Sounds like you have a rather good size operation.

 

[AZRentals]

You've come to the right place. There's a wealth of information here. Did you find what you were looking for?

We've been building transmissions for your company for the last two decades so I hope you aren't having trouble with one of ours...

I may be calling you for some advice as we have a small problem that is driving me nuts. I think it's a wiring harness but I'll let you know if we can't find it.

Welcome to the forum AZRentals. :usa

Sounds like you have a rather good size operation.

Thank You. And yes we are big enough to handle anything that makes sense.

 

[Lashlander]

Roll over Pete worked for ECCO out of Indio I think. Haven't seen him post for a while. Welcome!

 

[AmerIndependent]

I may be calling you for some advice as we have a small problem that is driving me nuts. I think it's a wiring harness but I'll let you know if we can't find it.

We would be glad to help as always. Still, it might be worth starting a thread anyway since you're no longer a probationary member. I'm sure the members of this forum would appreciate being able to take a whack at it!

While we have our knowledge, we don't know everything- you never know, there could be a member that's experienced the exact same thing. I'd say if you have the time, it's always worth a try.

 

[AZRentals]

We may have figured it out. The unit has been running for a while so we'll wait and see.

 

[AmerIndependent]

We'll keep our fingers crossed for you.

 

[Bunner]

Bunner

Hay all
I have been involved with farming and farm equipment for 35 years. The last few years I have picked up some heavy equipment to use around the farm. Most of it is older equipment and I do most of the repairs myself. Your site has been and I know will be very helpful in the repair, restoring of my equipment.

 

[tracksntreadslo]

Hi ...I Have been around heavy equipment and logging equipment for most of my life and have ran lots of various machines..I worked in the logging industry for many years and with cutbacks i had to change careers..I now work in pipe trades in fire protection....I am still intrested In construction equipment and collect ,build radio controlled 1/14 scale construction ,logging equipment...I am looking forward to being a member and shareing some of my stories and photos ..Cheers Lou

 

[matts4x4]

matts4x4

My experience, well I grew up on a ranch working on and running tractors. Now I am 32 years old. Bought my first dozer (D3B) almost 3 years ago. Bought a little 6 yard Ford dump truck 1 year ago. And just made my exciting purchase of a excavator last week. A MDI/ Yutani 140B LC. Runs good, looks nice but have a few questions. I will post in a new thread later but the question is.

The Yutani 140, same as a Kobelco 120, I think. Has 4 run settings on a dial. Mine is all wore out and I dont have any books, but could someone tell me what the different settings are. Moving clockwise and starting at the far left, 10 o'clock it looks like a I, S, C, D.

Thanks, Matt