• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by RnR LAMF

  1. RnR LAMF

    CAT 305e RH Thumbwheel stopped working

    Hello HEF! I got a Cat305e2 mini-ex and the RH Thumbwheel stopped working entirely. Active code for voltage above normal 1658-3 seems to be the problem, checked all the relays and fuses they're ok, plugged and unplugged the connector, its got battery voltage to the connector (well I think at...
  2. RnR LAMF

    Cat 420f Joystick aux Fault

    Excellent thanks Nige!
  3. RnR LAMF

    Cat 420f Joystick aux Fault

    Hello everyone Im working on a Cat 420f Backhoe s/n jwj01987 its intermittently throwing voltage codes for the extendahoe/aux switches. They will randomly work sometimes then not, I think I may have a wiring issue but I don't have a schematic, checked all fuses and relays. The codes i'm...
  4. RnR LAMF

    CAT 262c2 Aux Hydraulic Fault Code

    If you don't mind that would be helpful, best to double check before having to fork that over! AGAIN, thank you very much for your help Nige!
  5. RnR LAMF

    CAT 262c2 Aux Hydraulic Fault Code

    Oh yeah 2204-8 my bad! Gotta replace the whole joystick huh? Geez.. Thank you so much for your help and the p/n Nige!
  6. RnR LAMF

    CAT 262c2 Aux Hydraulic Fault Code

    Hello So I got a Cat 262c2 skidsteer that has a flashing yellow warning lamp, plugged in and found the following fault codes 2204-3 Aux Lever #1 Position Sensor : Voltage Above Normal 2204-4 Aux Lever #1 Position Sensor : Voltage Below Normal 2004-8 Aux Lever #1 Position Sensor : Abnormal...
  7. RnR LAMF

    Cat 416d will not move

    Ok that makes sense...I’ll give that a go and see if I have any pump flow going on. And thanks for the picture showing the relief valve all this is super helpful
  8. RnR LAMF

    Cat 416d will not move

    Hey thanks for that Mark! ...Forgive me if I’m interpreting this incorrectly, but If I’m getting near 0 psi reading at the pump check port (#1 on previous post) then it’s likely either the charge pump or something upstream from that is failing to provide the needed flow to the pump?
  9. RnR LAMF

    Cat 416d will not move

    So the service manual i have for 416d has almost nothing transmission related in it that I can see. Did some digging around the web I found a transmission troubleshooting guide in a 416b manual. I know it’s a different transmission but I think the basic idea is the same. Steps point to #15...
  10. RnR LAMF

    Looking to chat about cordless power tools/kits! Leaning towards Milwaukee

    +1 on Milwaukee Cordless I own probably a dozen of them, crazy rugged and powerful. The Bluetooth feature that lets you track and lock out tools from your phone is pretty neat. Makes my old dewalt stuff seem stupid in comparison. The 1” impact is a game changer of a tool. I’ve found some...
  11. RnR LAMF

    daewoo 1550xl ... need parts

    Man I empathize..finding parts for daewoo is pretty rough. The only place I’ve worked with that reliably can get me most anything I need for doosan/daewoo is H&E Equipment in Denver ask for David Miller in parts (303)289-2201
  12. RnR LAMF

    Cat 416d will not move

    Ok today I checked pressure at all the above test ports warm at high idle and I have have zero pressure transmission. Initially I thought my gauge may have been acting up so I plugged it into the hydraulic pump to make sure it’s ok. Is there a maybe a pressure relief valve or something I may...
  13. RnR LAMF

    Cat 416d will not move

    I do, I just didn’t have them with me at the time, nor did I honestly really an idea of what range I was looking for, this is very helpful thank you PE!
  14. RnR LAMF

    Cat 416d will not move

    Hello Guys, I need help. So I have an older Cat backhoe (416d with 4 on the floor 2000-2001) that hasn’t moved in a while. The engine starts runs great, all the implements and hydraulics function fine....BUT The transmission will not shift into forward or reverse. After doing the the stuff...
  15. RnR LAMF

    New Member from Colorado

    Hello I’m K Been lurking around the forum for a long time never joined tho...this is probably one of the best forums on the internet. Im an equipment/truck mechanic in central Colorado, I generally tend to work on funky stuff no one else will touch, I’m pretty sure I’m in good company here
See more
Top