• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

skid steer electrical problem

  1. J

    Weird electrical issue New Holland LS185.B (SEE VIDEO)

    Hello, I have a weird electrical issue going on with my Skid Steer. It's a 2007 New Holland LS185.b. It has a fully charged battery, but checkout the dash lights. They fade in an out. When I turn the key to start, there is nothing. Any ideas? Here is the link to this 30 second video:
  2. C

    CAT 236 4YZ06424 Interlock Failure

    Hi, Im Diego from Mexico. I have a CAT 236 (Product Identification Number CAT00236T4YZ06424) that stopped workking last week. it seems to be a problem with the Interlock system, we already checked out the hydraulic system and its working good. We checked the safety switches (seat and harness)...
  3. S

    Case SV300 crank but no start

    Case SV300 (Hours 2,567) skid steer will crank but will not start and will show no signs of wanting to start even with starting fluid . A 3835 code (throttle valve actuator power stage low ) appears . Although one time I moved the throttle handle slightly and it seemed to want to start for a...
  4. Matt Baldwin

    Bobcat 610 wiring troubles....

    I just bought myself a bobcat 610 for pretty cheap, it's not running, but the engine will turn if I bypass the ignition switch straight to the starter solenoid, I replaced the ignition switch, but got some wiring mixed up (my friend who is "helping me" pulled off the stickers I used to label...
  5. A

    Toyota SDK7 Pedal lockout

    I have a Toyota SDK7 skid steer which has been sitting for about a year. Both of the pedals seem to be locked out by a pin or cam which I can feel if I reach under the pedal but I cant get released. From what I have read the pedals could be locked out from a safety sensor which isnt engaged...
  6. T

    Mustang mtl 16 2006 start issue

    I was wondering if you could give me hand diagnosing my skid steer. It ran fine drove it to the barn tried starting the next day and and it fires then shuts right off before it starts. I pulled the plug at the stop solenoid andi have power at the red wire with the key on as soon as I turn it to...
  7. D

    Cat 259d low voltage

    I keep getting a low voltage message on machine replaced the battery message went away for couple days than came back, tested the battery it was good so replaced the alternator and voltage went back up to around 14.2v for about 2 days now its dropping below 11v with the error message and wont...
  8. J

    277c (MTL) turns left without my permission.

    I have a serious problem with my 277c Multi terrain loader (skid steer) it want to turn left on its own when i have the joystick on forward (slightly) the right doesn't move until i push the joystick even further forward and when i let go making it neutral the left side would keep spinning for...
  9. DClearing

    SKID LOADER FIRE???

    So I bought a 2013 333E last year and it only had about 1200 hrs on it. While still under warranty, I had a High flow sensor go out and my left joy stick go out. John Deere fixed it for me and took care of everything. Well my warranty went out this past March and guess what? Hell has broken...
  10. Fish_Hunter

    New Holland LS160 battery light / tach shutdown

    New to the site and in need of some help. I have a new to me new holland ls160 that has an intermittent problem. The battery light starts flashing and beep as well. It then will shut off the skid steer. Starts right back up every time. Voltage reads 14.4 when running and 12.6 when off. This is...
Top