• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

throttle

  1. R

    Samsung 210LC 1998 model or MX225LS , throttle and fuel shut off issues FCY0597

    Hello All, I searched and didn't find out what I was looking for. He gave me 2 different models so I am not sure which it is.I am good at troubleshooting equipment but I am helping a buddy out and he is 12 hrs from me. The machine lost throttle control. they bought a new throttle control dial...
    • runnwo
    • Thread
    • fuel shutoff samsung 210lc throttle throttle control
    • Replies: 3
    • Forum: Excavators
  2. G

    Engine not revving up

    Hello. I have an engine acceleration problem on my 289D CAT skid steer. The governor actuator (#1 in the attached PDF) on my machine does not respond to throttle inputs from the cab. The display unit controller, however, does indicate an accurate signal is being generated from the controls...
  3. Meghan

    Detroit 6-71T Won’t Idle Without Manual Control of Rack

    Hey there. Having some trouble getting a Detroit 6-71T in-line to run at idle without manual control of the injector rack. I am aware that this particular thread is for trucks, but I am resurrecting a pair of Johnson & Towers Detroit Diesel 6-71T engines in a sportfish boat. The boat sunk back...
    • Meghan
    • Thread
    • 6-71t 71 series detroit diesel governor throttle
    • Replies: 12
    • Forum: Trucks
  4. S

    Case 580B lower throttle foot feed return spring

    Hello group members, I have a Case 580B lower throttle foot feed return spring that is rigged with wire on the most forward attach point. The previous operator used wire wrapped around a steering line as an attach point for the spring. 1) Can you provide me with the dimensions of the proper...
  5. J

    Aux throttle control for f800 with knuckleboom

    Heya, is there any relatively simple way to rig up a hand throttle control near the knuckle boom controls that wouldn’t disrupt normal foot pedal control during driving? This palfinger crane is great, but she runs much better at ~1100rpm than 750. I’m often going back and forth between the crane...
    • John V
    • Thread
    • aux auxiliary f800 throttle
    • Replies: 4
    • Forum: Trucks
Top