• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

winch

  1. Tom Sticpewich

    Terex Franna crane service info

    Hi all, I have service to do on a Terex AT-15 Franna and on the service sheet there is a couple of jobs I can find any info on in the manuals. “Adjust rear boom pivot bearings” “Change winch gear box oil” “Change winch brake oil” Can anyone offer some advice in regards to oil drain and fill...
    • Tom Sticpewich
    • Thread
    • at-15 crane franna service advisor terex winch
    • Replies: 3
    • Forum: Cranes
  2. J

    mile marker hydraulic winch disassembly help

    Hey all, so I have some internal damage in the gearbox of my mile marker 12000 lb hydraulic winch. I'm trying to get the thing apart but not having much luck with it. They sent me a parts stackup, attached below. I've tried whacking the drum off with a deadblow, and using a gear puller, to no...
    • John V
    • Thread
    • hydraulic repair winch
    • Replies: 4
    • Forum: Trailers
  3. T

    DEERE drive motors. NEW.

    I aquired these at a DEERE plant surplus auction a few years ago. They are NEW. Info in photos. Can ship USA only. Located Iowa.
  4. C

    National 1400 winch issue

    Good morning! I am new here and had an issue yesterday when operating my National 1400 Boom truck. I was setting trusses and when winching down, I would slow down to set them down gently. When I did that, it stopped winching down. I would start moving the lever and it would not move until I was...
  5. G

    Mount a hydraulic winch on a Cat 966C?

    I have a 966C with forks that I use for logging - mostly decking and loading. I saw a local guy with a wheel loader that he had mounted a hydraulic winch on - in the front, so that it pulled into the forks - and that looked like a pretty sweet setup for doing some limited cable skidding...
  6. C

    Will a Cat 53 Winch Fit on a D3C III dozer

    Does anyone know if a Cat 53 Winch will work on a D3C III dozer with serial number 6SLXXXXX? I ask because the sales brochure for the D3C and the D3C II both list the Cat 53 Winch as optional equipment. But the sales brochures for the D3C series III does not list a winch as optional equipment...
  7. ScottP

    SEAL KIT FOR SIMON RO BOOM TRUCK WINCH MODEL 42131

    THANKS IN ADVANCE FOR ANY HELP OR SUGGESTIONS.. LOOKING FOR A SEAL KIT FOR SIMON RO TC-2800 SERIES MOBILE BOOM TRUCK CRANE..THE WINCH IS A MODEL# 42131 SER# KS95036BMP I HAVE SCOURED THE INTERNET FOR SOMETHING AND COMING UP WITH NOTHING HERE..AND AGAIN THANKS IN ADVANCE FOR ANY HELP THIS IS A...
    • ScottP
    • Thread
    • 2800 42131 model simon-ro winch
    • Replies: 0
    • Forum: Cranes
  8. B

    JD 550H winch needed

    I recently bought an '04 550H LGP for work around our property in NC. Looking for forestry package, limb risers and winch with controls. If anyone hears anything please let me know. Thxs
    • Bearhead
    • Thread
    • 550h forestry winch
    • Replies: 0
    • Forum: Dozers
  9. Matthew Stetar

    Finally found the one!! Newest Toy!!!

    Alright guys, i'm new to the site but been around heavy equipment my entire life. and been slowly building my very own empire of dirt movers for some time. I've been looking at getting into a D4 or D5 size machine with a winch and an angle blade. i love Caterpillar but can never seem to find one...
    • Matthew Stetar
    • Thread
    • bulldozer d41a dozer komatsu new toy winch
    • Replies: 5
    • Forum: Dozers
Top