These two trucks about all they have in common is there both dump trucks. Nothing wrong with a Mack but it may be built of all Mack parts were the other truck is built of parts that are generic what 90% of all trucks are built from.Thanks so much you right about parts , so I'm kind confused orange Ford it's better or mack white? Sorry I didn't fully understood
Also would probably help to know what you would be expecting to be hauling. That Mack looks like it was setup for some light material with that tall sided body!The mack truck has a really tall bed, if you don't have big equipment, it will be hard to load with a mini excavator or a skid loader.
I'd be more interested to know what engine transmission and rears gear ratio are in each truck.
Your sides aren’t near as tall as that Mack. If you look at your sides, they are top of the door /window height. That Mack is clear above the cab, probably taller than your headache rack.I have a 2007 Kenworth T800 which has only a 430hp Cat motor. I wouldn't want anything with less HP. The high sides won't work to get loaded easily unless you specifically want that. I wanted high sides which is what I got, but I knew I was going to install a highlift gate that allows me to load and unload that way and drive equipment up into it. High sides allow the highlift gate to rise higher up so the excavator can reach in. Adding a highlift gate though is expensive. I got the truck cheap though. I would get the red truck. Maybe look for a Kenworth. Newer is better.